TLT 用Y 線一問

我部TLT 用 2 CH 既控, 我有兩隻3003, 我想用Y線將2個SERVO 連係一齊, 請問要用Y 線個電變係咪要高要求D (要高A數D)?

<br>我用LRP AI Runner Reverse digital, 請問得唔得?
Thanks <img src="./images/smilies/victory.gif" smilieid="14" alt="" border="0">
<br><br>Spec of LRP AI Runner Reverse digital

[ 本帖最後由 kaho0338 於 2007-4-27 01:04 編輯 ]

如果用3003, 其實窄窄地. 仲要睇你用幾吋呔同有無鎖差速.
但BEC得5V, 你帶定接收電去玩好D.

原帖由 orange00 於 2007-4-27 01:59 發表
如果用3003, 其實窄窄地. 仲要睇你用幾吋呔同有無鎖差速.
但BEC得5V, 你帶定接收電去玩好D.

原裝個條呔, 全鎖差速呀....... 加多排接收電咪好重
anyway, 等我買條y線試下先, thanks

Whether the BEC of your ESC can provide enoght power to 1 receiver and 2 servos depends on the power (W) it can supply NOT the voltage (V). However, there is no information regarding the powe...

原帖由 ryancmlam 於 2007-4-27 06:58 發表
Whether the BEC of your ESC can provide enoght power to 1 receiver and 2 servos depends on the power (W) it can supply NOT the voltage (V). However, there is no information regarding the powe...

Agree! But power = Voltage X Current. Even with the same current compare wth other ESC which have 6V BEC. The power will be 1/6 less.

我部死人頭三波ＴＬＴ三個SERVO（有兩個用Ｙ線），用１０１ＢＫ都得ｗｏ

原帖由 SPAWN 於 2007-4-27 23:06 發表
我部死人頭三波ＴＬＴ三個SERVO（有兩個用Ｙ線），用１０１ＢＫ都得ｗｏ

101BK 個BEC係7.2V

原帖由 orange00 於 2007-4-27 23:16 發表

101BK 個BEC係7.2V

但係我TXT又唔得wo

原帖由 orange00 於 2007-4-27 23:16 發表

101BK 個BEC係7.2V

In fact, there is no BEC in 101BK. 101BK gets the receiver power directly from the battery pack. That's why there is a seperate red receiver plug in 101BK.

If you use 101BK, your receiver needs to have the BEC circuit, otherwise, both the receiver and servo might be damaged (some might not).

今日買左條y cable, so far 都冇問題....