請問用咩膠紙封窗噴油呢？

耐無買孖星車殼
原來而家唔使封窗同自己剪貼紙
但係呢，我都係中意茶色窗多d，想問下如果我要自己封窗噴油應該用咩膠紙呢咁？(同埋點做法？)

[ 本帖最後由 WongTF 於 2007-5-4 11:19 編輯 ]

u may use the masking tape to mask it.....the one from tamiya is good but a bit expensive.......or u may buy the masking tape from stationary store....little cheaper.......
just mask inside the body and cut the shape.....or pre-cut the shape and then mask.........that's it!!!!

原帖由 monkichi0210 於 2007-5-4 12:15 發表
u may use the masking tape to mask it.....the one from tamiya is good but a bit expensive.......or u may buy the masking tape from stationary store....little cheaper.......
just mask inside the bo ...

但係我去文具店買個D MASKING TAPE 質素都唔係好好, 好易滲漏左D噴油入去, 我通常會用雙星0既MASKING TAPE 封住要遮蓋0既範圍0既外框, 中間0既位置先至用文具店0既MASKING TAPE, 咁樣會安全少少

原帖由 curien 於 2007-5-4 12:36 發表


但係我去文具店買個D MASKING TAPE 質素都唔係好好, 好易滲漏左D噴油入去, 我通常會用雙星0既MASKING TAPE 封住要遮蓋0既範圍0既外框, 中間0既位置先至用文具店0既MASKING TAPE, 咁樣會安全少少

right brother........
i used the same method as u..........but all depends on the quality of the masking la.....some stationary store's masking tape is good or even better than the tamiya one.....but all by chance........and maybe some guys here will think tamiya one is too expensive......just wanna give them one more suggestion jar........

原帖由 monkichi0210 於 2007-5-4 12:47 發表


right brother........
i used the same method as u..........but all depends on the quality of the masking la.....some stationary store's masking tape is good or even better than the tamiya one. ...

係丫, 雙星個D MASKNIG TAPE 0既價錢太貴, 有時噴兩, 三個殼就用完一卷, 有時噴一個車殼買其他工具(噴油, MASKING, LINE STICKER)都可能貴仲過個殼本身0既價錢呢