Landie Defender!

原帖由 bcgg 於 2007-5-11 18:56 發表


Are you live in Fanling???
你包二奶????

唔係...我NEWYEAR 先會返..你明架啦=.=
我無你咁花心...

幾靚仔喎~~
好想知個車架你會點整...
我果部諗到頭都爆

原帖由 宏 於 2007-5-17 04:47 發表
幾靚仔喎~~
好想知個車架你會點整...
我果部諗到頭都爆

I am thinking to order some body post from CC01 VW and see if it works....  Do you have any other idea??  

原帖由 宏 於 2007-5-17 04:47 發表
幾靚仔喎~~
好想知個車架你會點整...
我果部諗到頭都爆

正常都係CCO1車架。

Outstanding bor, nice!!!!!  

Looks like the HK old police car!!

原帖由 mikewu 於 2007-5-17 16:45 發表


I am thinking to order some body post from CC01 VW and see if it works....  Do you have any other idea??  

正計劃開發前置三速波箱四驅車架....車架已造好
不過仲有好多問題未解決到

Here is my Land Rover Defender

好毐既Defender呀........!真係好鬼靚,最衰買唔到...!
想問o下F350轆位o岩唔o岩o架?

原帖由 Deemax 於 2007-5-18 11:50 發表
好毐既Defender呀........!真係好鬼靚,最衰買唔到...!
想問o下F350轆位o岩唔o岩o架?

得! fit wheelbase的
不過有個問題...車架個波箱會頂車頭....

原帖由 chowhungjai 於 2007-5-18 11:21 發表
Here is my Land Rover Defender

Brother chowhunjai.. can you show us how you mount the body onto the chassis?  Is it a CC01 chassis you have there?

hope those photos can help you

Sorry, I forget to post these two!!

Thanks bro... you are being a big help.....

如果加返少少OFFSET(鈴)會更加好.

正ar!!

原帖由 mikewu 於 2007-5-11 18:23 發表

                               
登錄/註冊後可看大圖

A long time ago lu....  Not sure if they still have them out there now...

Bro Mike,
I found one in GuangZhou yesterday, RMB150.  Since it was too hot & the kit is too big I can only take one to HK.
If you may passby Guangzhou when going to your factory and would like to get one more, please PM me for details.
Next time may need to bring the tools to take out the body shell, actually no need to bring the chasis & rc back HK

feel so good~

我想要部車後面果部Polini910多D