RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1255|回復: 1
打印 上一主題 下一主題
收起左側

how to maintain your IB4200 cells

[複製鏈接]
跳轉到指定樓層
1#
chrishkyung 發表於 2007-6-9 11:23:06 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
Please share your methods to maintain IB4200 cells
2#
 樓主| chrishkyung 發表於 2007-6-9 16:45:08 | 只看該作者
As a top-grade racing cell, its super performance is associated with fast Self-discharge feature. It is temperature dependent, and become more serious at hot environment.
If possible, it is recommended to have racing cells stored at 0~20ºC environment.
In any case, because of fast self-discharging, the Open Voltage of the cell may fall below 1.0V each. The racing performance may be affected then.
It is recommended to make periodic checking on Open Voltage of the cells. In case of being down to 1.1~1.0V level, it is recommended to recharge the cell for not more than half of its capacity (~2000mAh) for further storage.
The above information applies to battery matchers, wholesalers, retailers, and end-users in general.
For special interest of matchers & racers, they could consider to run a cycling process, and then the recharging for storage as mentioned above.
It is also important that end-users should not dead-short the batteries, or use drainage device in discharging cells <@0.9V (as Intellect cells perform differently than those of 3300mAh).

Extracted from IB website
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-11-16 13:26 , Processed in 0.042989 second(s), 16 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表