教你如何整 "TRC" Car....

I have got a TT-01, want to make it into a TRC car

What do i need to buy (if i dont want to get a TA02)

I am planning to cut my TT-01 front & End bumper as shown in your pics
and planning to buy

Tamiya Rally 呔
long避震(buy which one?)

is that enough??

I really want to prepare for TKO party

[ 本帖最後由 lam727 於 2007-8-26 21:11 編輯 ]

原帖由 lam727 於 2007-8-26 20:09 發表

                               
登錄/註冊後可看大圖

I have got a TT-01, want to make it into a TRC car

What do i need to buy (if i dont want to get a TA02)

I am planning to cut my TT-01 front & End bumper as shown in your pics
and planning  ...

You don't really need to get TA02 shocks in order to raise the ride height... you can also use the option shock mount which comes with most shock kits to raise the ride height.... check brother "SunLi" in post #67

原帖由 mikewu 於 2007-8-22 08:00 發表

                               
登錄/註冊後可看大圖

$38/pair.......

請問有冇part no. 的?

原帖由 doooouglas 於 2007-8-27 11:20 發表

                               
登錄/註冊後可看大圖

請問有冇part no. 的?

唔使part no. 啦.....  去是但一間模型舖問... "比對孖星菠蘿呔丫唔該...." 攪掂!  

please share your damper setting??

Thanks a lot

[ 本帖最後由 lam727 於 2007-8-29 14:33 編輯 ]

Hello everyone does the Original TA02 Oil Shock same as the one that use on the TRC rally car? and does anyone have the manual for the Original TA02 Oil Shock set?  thanks very much

登錄/註冊後可看大圖

er.... 星期日睇完你地玩 (有兩架 Delta Integrale)﹐再睇完個 POST.... 中毒~ XD
入左哩架﹔ (TT01 E30 M3)
http://www.tamiyausa.com/product/item.php?product-id=58323

唔知拉咩花~ XD
http://www.youtube.com/watch?v=58ShlIgm2Bw

想請教mike兄, 點解唔用架ta-02o黎跑呢?

Time for the factory "TRC" car.

DF03RA

中毒+1    但對我黎講好難

拉力看上去比较好玩

woo good job man, just want to join you guy tko court, may go this sat. Ching what time will you go?