DIY Rally Waterproof Inside Cover (for TKO rally)

原帖由 TJ~1 於 2007-8-27 00:56 發表

                               
登錄/註冊後可看大圖

果個係幾多升既水黎嫁?

5 litre Bonaqua

原帖由 doooouglas 於 2007-8-27 11:18 發表

                               
登錄/註冊後可看大圖

我尋日玩馬路都玩到有唔少砂粒飛晒入去個車架度
水樽己經買了~可以準備開工
PRiNCe 師兄, 水樽底部係咪開空佢都冇大問題呢?

if you do not reverse the car, sand will not fly into the chassis from the back. It is a very easy job, cut in half and stick to chassis  hope it works for you

原帖由 PRiNCe 於 2007-8-25 00:13 發表

                               
登錄/註冊後可看大圖

my new invention..very useful for dirty conditions at TKO

Cut bonaqua bottle in half and fit to size of TT01 chassis

                               
登錄/註冊後可看大圖

Add  ...

bro. prince,

great DIY job man!!!

after reading the post....i have some idea come out........just look it's good or not..........

原帖由 monkichi0210 於 2007-8-27 16:06 發表

                               
登錄/註冊後可看大圖

bro. prince,

great DIY job man!!!

after reading the post....i have some idea come out........just look it's good or not..........

Also very good idea..but, if fully closed - no place for motor to 'breathe' may overheat  you can try to modify and test

原帖由 PRiNCe 於 2007-8-25 00:13 發表

                               
登錄/註冊後可看大圖

my new invention..very useful for dirty conditions at TKO

Cut bonaqua bottle in half and fit to size of TT01 chassis

                               
登錄/註冊後可看大圖

Add  ...

pls comment yr invention

is it work?

Put around 5mm Diameter circle hole clear the Heat sink and near the motor cooling fan may be better....