退役/服役

Thanks

好有錢好有錢 :Q

u are so rich that u can buy two 05MS

終於搞掂晒~!

換埋尾珠差,換返晒做WIDE PITCH~
入過晒O的油壓油,換過晒O的彈車.......

最後SET埋O的DOWNSTOP等等.......

俾全哥審視一下.......

嚟緊十一月就係用佢嚟鬥~!哈!

頭先係鋪頭時CHECK過架車......

用3900時,電池果邊都係重過電子O野果邊.......都係左右未BALANCE......
唯有就係個SETTING嚟就.....多得全哥仔幫我微調~

恭喜恭喜!

跟住.......係時候打散架415砌過......

好多位置都已經虛晒.....大量波頭要換.......底板都換過塊新底板.........

原帖由 Brushless 於 2007-10-17 10:09 發表

                               
登錄/註冊後可看大圖

May I ask when can I buy a 靚雞, is the one selling in "cat" shop good (~$200). I am using the $30 雞 and many a time I found it is difficult to control the temperature. It tends to overheat and I h ...

You may try the brand called Goot, a Japanese brand.  I just brought one model RX-932AS at HKD2,680.  It is good.  I use it for all sort of purpose and it is good.  But it is very expensive

$2,680 for a 靚雞, would you please post a photo, although I'm not going to buy it, I would like to admire it. Does it has auto-temp control?

And Mr. loman, would you please tell me where can I find the Hakko, I went to shamshuipao "duck" street yesterday, what I could find is still $30雞

The Shop next next to 昌記has.

升級....................戰鬥力

原帖由 AMAT 於 2007-10-22 00:35 發表

                               
登錄/註冊後可看大圖

終於搞掂晒~!

換埋尾珠差,換返晒做WIDE PITCH~
入過晒O的油壓油,換過晒O的彈車.......

最後SET埋O的DOWNSTOP等等.......

俾全哥審視一下.......

嚟緊十一月就係用佢嚟鬥~!哈!

部車咁正，會玩邊組?

我支都只係百零蚊O既GOOT..........

原帖由 campos 於 2007-10-23 13:28 發表

                               
登錄/註冊後可看大圖

部車咁正，會玩邊組?

工房盃

原帖由 Brushless 於 2007-10-23 08:51 發表

                               
登錄/註冊後可看大圖

$2,680 for a 靚雞, would you please post a photo, although I'm not going to buy it, I would like to admire it. Does it has auto-temp control?

And Mr. loman, would you please tell me where can I  ...

Please click the below link for the $2,680 Goot soldering Iron

http://www.goot.co.jp/e/detail.html

For Hakko, you may try the model FX-951, it costs about $1,630 from 鴨X街.  A shop called "Hong Kong Wing Shing Electronic Co" Address = 245 鴨X街 is displaying it at the door.  Click the below link for it

http://www.hakko.com/english/index.html

Also you may try another shop (cannot remember its name) at about 127 桂林街 (Sham Shui Po MTR Exit C2), just turn a corner from 鴨X街 to 桂林街, it has a lot of soldering iron you can choose from.

多謝，真的大開眼界。

車架主要結構洗返乾淨喇~!呵!

換埋新底板~

宜家個諗法可能係......TA05MS行23T......
呢架415就行......BRUSHLESS!嘿嘿!

嚟緊星期六返屋企再執埋O的臂果O的O野......

原帖由 AMAT 於 2007-10-23 14:19 發表

                               
登錄/註冊後可看大圖

工房盃

都唔見人

原帖由 AMAT 於 2007-11-5 14:55 發表

                               
登錄/註冊後可看大圖

車架主要結構洗返乾淨喇~!呵!

換埋新底板~

宜家個諗法可能係......TA05MS行23T......
呢架415就行......BRUSHLESS!嘿嘿!

嚟緊星期六返屋企再執埋O的臂果O的O野......

the servo saver is black color......

原帖由 minimini 於 2007-11-7 14:49 發表

                               
登錄/註冊後可看大圖

the servo saver is black color......

有白色咪用白色,有黑色咪用黑色囉......哈!

我都仲有好多個下......白色OK呀~