Hi All Bros,
Just bought it tonight at KWS- HS.
Hope to know what brand how much of motor & ESC used on your crawler?
And the servo need more torque? ??Kg/cm
Thanks for all.
Hi All Bros,
Just bought it tonight at KWS- HS.
Hope to know what brand how much of motor & ESC used on your crawler?
And the servo need more torque? ??Kg/cm
Thanks for all.
may i know how much u bought at HS ?
i use mc330 with 3A BEC, Integy 50t moto, towerpro mg995 servo(using mg995 servo, u must add BEC on your esc, or u must have 2a bec on your esc)
Hi Bro,
What's the function to use separate BEC.to the ESC?
Is the main batt connect to ESC and receiver to control 2 servos.
the reciever with BEC inside, or built-it BEC's current not enough?
Thanks Bro.
Hi Bro,
What's the function to use separate BEC.to the ESC?
Is the main batt connect to ESC and receiver to control 2 servos.
the reciever with BEC inside, or built-it BEC's current not enough?
T ...
most ESC "built-in BEC's current not enough" so it need a bigger "A" BEC to give more power to servo, otherwise, the servo will stop while you turn left, right. or burn your esc.
Hi Bro,
Thanks your advise, will get one for my AX10.
it depend on on what ESC you using!
I know some ESC can output 6V, 5A BEC power.
Novak ROOSTER CRAWLER-EDITION
ROOSTER CRAWLER-EDITION FEATURES
2 specifically designed crawling driving profiles which feature Zero Reverse Delay, and high-powered Drag Brakes (or “Hill” or “Hold” brakes)
Built-in Li-Poly Cutoff Protection (Profile 2)
Water-Resistant Case
Heavy-Duty 6 Volt / 5 Amp BEC
Direct-Solder Wiring Tabs
User Replaceable Input Harness
Novak’s One-Touch Set-Up™
Built-in Power Output for Optional 6V Accessory Fan (#5648)
Novak’s Radio-Priority Circuitry™
Novak’s Polar Drive Circuitry™
Thermal Overload Protection
Designed and Assembled by Novak in the USA using globally sourced components
ROOSTER CRAWLER-EDITION SPECIFICATIONS
Forward/Reverse: Forward and Reverse
Input Voltage: 4-7 Ni-Cd/Ni-MH cells (1.2V/cell) or 2 Li-Poly cells
Footprint: 1.54" x 1.18" (39 x 30 mm)
Weight: 2.66 oz. (75.5 g) w/wires; 1.57 oz. (44.5 g) w/o wires
Motor Limit: 12-turn brushed (at 6 cells Ni-MH)
On-Resistance: 0.0014 ohms (forward); 0.0028 ohms (reverse)*
Rated Current: 400 amps* (forward)
most ESC "built-in BEC's current not enough" so it need a bigger "A" BEC to give more power to servo, otherwise, the servo will stop while you turn left, right. or burn your esc.
check this out ...
does any bro know whether this extra BEC can be used in brushless Esc ??......... many thx !!