等左個幾月........Axial AX10 Scorpion crawler

原帖由 kaho0338 於 2007-11-13 01:15 發表

                               
登錄/註冊後可看大圖

which esc planning to use now ?

Hi Bro,
Planning to buy Rooster - crawler edition set w/ 55T novak motor.
around US$110.-/set, its has 6V 5A BEC and w/ built-in Li-po voltage cut system, brake system.

Good choose!

原帖由 fyin 於 2007-11-13 12:36 發表

                               
登錄/註冊後可看大圖

Hi Bro,
Planning to buy Rooster - crawler edition set w/ 55T novak motor.
around US$110.-/set, its has 6V 5A BEC and w/ built-in Li-po voltage cut system, brake system.

less than 1k @@ ... the price is nice boo

原帖由 fyin 於 2007-11-13 12:36 發表

                               
登錄/註冊後可看大圖

Hi Bro,
Planning to buy Rooster - crawler edition set w/ 55T novak motor.
around US$110.-/set, its has 6V 5A BEC and w/ built-in Li-po voltage cut system, brake system.

this Esc is available in HK ??........or need to buy from on-line shop ??........ Thx !!

原帖由 minimini 於 2007-11-13 18:27 發表

                               
登錄/註冊後可看大圖

this Esc is available in HK ??........or need to buy from on-line shop ??........ Thx !!

No. you need order from Tower Hobby of The Crawler Store.

原帖由 minimini 於 2007-11-13 18:27 發表

                               
登錄/註冊後可看大圖

this Esc is available in HK ??........or need to buy from on-line shop ??........ Thx !!

Hi Bro Minimini,
Novak has a agent in HK. I will try to order
one set via KWS model shop. This ESC with 55T motor is new product for crawler.
Novak Hong Kong agent is Univeral Model Co.,

原帖由 fyin 於 2007-11-14 00:18 發表

                               
登錄/註冊後可看大圖

Hi Bro Minimini,
Novak has a agent in HK. I will try to order
one set via KWS model shop. This ESC with 55T motor is new product for crawler.
Novak Hong Kong agent is Univeral Model Co.,

can u share the price with us, when u order this set ?
it is so attractive if under 1k

原帖由 kaho0338 於 2007-11-9 23:38 發表

                               
登錄/註冊後可看大圖

using mg995 servo, u must add BEC on your esc, or u must have 2a bec on your esc

How about Tak Po's ESC like TP-M8R? Anyone know the BEC spec on this local ESC?

原帖由 Ang 於 2007-11-16 09:45 發表

                               
登錄/註冊後可看大圖

How about Tak Po's ESC like TP-M8R? Anyone know the BEC spec on this local ESC?

those esc should be only 1A .... only fews model esc for off road got 2a (most are novak)

[ 本帖最後由 kaho0338 於 2007-11-16 14:04 編輯 ]

暫時, 新setting....

Thank you Bro Edison
99% finish

原帖由 simontam 於 2007-11-16 20:13 發表

                               
登錄/註冊後可看大圖

Thank you Bro Edison
99% finish

can u share what have u mod no it ? it looks nice

Hi Bro Kaho,
How much the Topcad 4 green metal shock in your crawler?
Is it better than existing plastic one? And did you replace shock spring, what color you change to? the existing is blue color one.
Thanks.

原帖由 fyin 於 2007-11-16 21:17 發表

                               
登錄/註冊後可看大圖

Hi Bro Kaho,
How much the Topcad 4 green metal shock in your crawler?
Is it better than existing plastic one? And did you replace shock spring, what color you change to? the existing is blue color o ...

i bought at $350 ( i think the price is expensive, b4 i ask about $300 only )
i don't think better than plastic one, because after i change it, my ax10 can not climb well as before,
the topcad shock only provide two different spring (very soft and hard), but i want medium.
when i use soft one, the car can not return to normal position(horizontal), when i use the hard spring the car can not climb well, because it is too hard (compare to the ax10 stock damper).....

also, this damper is very hard to find spring, because topcad didn't provide any option for this spring.....

[ 本帖最後由 kaho0338 於 2007-11-16 21:37 編輯 ]

if u can find ..... i think this one can be much better
integy Heavy-Duty MSR8 Shock
http://www.integy.com/cgi-bin/we ... O8eH-25107267290.a7

                               
登錄/註冊後可看大圖

So many thanks bro.

Hi kaho, Wheely king shock is ok, you can think think
http://www.hpiracing.com/options/en/10830.html

原帖由 simontam 於 2007-11-17 12:09 發表

                               
登錄/註冊後可看大圖

Hi kaho, Wheely king shock is ok, you can think think
http://www.hpiracing.com/options/en/10830.html

it looks good.....
but, i will try to mod the topcad damper, otherwise, it just waste my new damper.

聽左edison兄意見, 再一次fine tune.... 比之前重心更底, 爬既角度更大, 如果油壓心再長多d, 爬既角度再加大

[ 本帖最後由 kaho0338 於 2007-12-5 01:29 編輯 ]

You seen ready to crawler !!!!!!!!!!!!!!!!!!!!!!!