去吧！D90 兵團..!!

我又要  我想比我架劈庶佬用 PM pls!!

原帖由 serpent715 於 2007-12-19 02:04 發表

                               
登錄/註冊後可看大圖

我又要  我想比我架劈庶佬用 PM pls!!

Remember you need a longer wheel axle for the Defender body.  It's not the same as Pajeros.  Meaning that it's a Long wheel base (same as CRV, Red Bull VW)  Pajeros/Jeeps/MUs use Short wheel base axle....................  KEEP THAT IN MIND!!!  

Yes, Mike,
I bought one from Bro Carman and found out the fact. How can I find a long transmission shaft ar? or I cannot modify the shell for the pajero la.
thanks a lot.

原帖由 eddywon 於 2007-12-19 21:29 發表

                               
登錄/註冊後可看大圖

Yes, Mike,
I bought one from Bro Carman and found out the fact. How can I find a long transmission shaft ar? or I cannot modify the shell for the pajero la.
thanks a lot.

eddywon兄

只要向後改一個位(紅圓),就加長車身,不過條shaft要愌長D.(師兄 有錯請指出)

carman 兄正確 , 只要將車尾部份移後一格就可以 , 只需要換過條長shaft就可以 ! 非常簡單 !

呢款底盤可共用幾款車殼 , Tamiya值得一贊 !

原帖由 eddywon 於 2007-12-19 21:29 發表

                               
登錄/註冊後可看大圖

Yes, Mike,
I bought one from Bro Carman and found out the fact. How can I find a long transmission shaft ar? or I cannot modify the shell for the pajero la.
thanks a lot.

Longer shafts can be found on ebay most of the time.  As far as local suppliers, you need to do some searching lu.....     Good luck and DON'T WAIT!  I have a feeling that they will run out of stock very soon as so many people bought the Defender body....  

Hello Bro,

I have got another idea la : buy a brand new VW Touareg CC-01 and dispose of the ugly shell lor !!
Then my CC-01's (pajero +pajero + Isuzu Mu) can stay with shells on shelf la !!

8xx- then !!

我呢個CR-V長底咪啱哂位!!
可以讓個給我嗎??

我又要一架~~~~~~~~~ 不過....如何不用殼柱穿住隻殼= w =?

原帖由 毒魚 於 2007-12-20 19:07 發表

                               
登錄/註冊後可看大圖

我又要一架~~~~~~~~~ 不過....如何不用殼柱穿住隻殼= w =?

鏍絲!!!!

原帖由 hoching 於 2007-12-20 19:15 發表

                               
登錄/註冊後可看大圖

鏍絲!!!!

好像十分不方便啦= w ="

I think the VW Touareg CC-01 is quite beautiful------a powerful rally

I thought I should try to use industrial magnets for the fixing of the hard shell..... If it works, will post to let bros know !!

原帖由 hoching 於 2007-12-20 19:15 發表

                               
登錄/註冊後可看大圖

鏍絲!!!!

好震撼! 你朋友仲有的倉底貨仲有多少, 我都想買架

原帖由 eddywon 於 2007-12-20 22:07 發表

                               
登錄/註冊後可看大圖

I thought I should try to use industrial magnets for the fixing of the hard shell..... If it works, will post to let bros know !!

Don't worry, I have a MUCH better way to attach the shell on the body.  But what you need is a body pole from the Red Bull Kit (you only need 2 of them in the front, I'll show the rear sometimes tomorrow)  

awaiting !!

Hello Mike,
do you still remember this ??
I want to buy the CC-01 before X'mas holiday wor, just want to know what is needed to have the defender shell on........
thx in advance......

原帖由 mikewu 於 2007-12-21 11:13 發表

                               
登錄/註冊後可看大圖

Don't worry, I have a MUCH better way to attach the shell on the body.  But what you need is a body pole from the Red Bull Kit (you only need 2 of them in the front, I'll show the rear sometimes tom ...

原帖由 eddywon 於 2007-12-23 23:20 發表

                               
登錄/註冊後可看大圖

Hello Mike,
do you still remember this ??
I want to buy the CC-01 before X'mas holiday wor, just want to know what is needed to have the defender shell on........
thx in advance......

Sorry mate...  I was taking care of something else this weekend.... I promise I'll post photos tonight.   But again, remember, you need a pair of Redbull VW body mount!!!

Easy man,
RC to me is a hobby, not a job.
Thx in advance !!