越野車拖車架

CC-01架 Pajero 車尾個拖車架假到死，我自己裝一個堅o既！應該夠力救D兄弟o瓜 ?!

登錄/註冊後可看大圖

買咗D鋼 "威也"，準備整車頭有動力o既拖車架。不過未有 idea 點整！
兄弟有無提供呀？唔該！

咁D力咪去晒落個殼度囉，唔怕爆殼咩，我果個落係個車架度架，遲D post相出黎，一齊研究下先

係呀 778, 但係CC-01個車架同車殼有段距離，好難o係車架道做力！你post D相出泥俾我參考吓丫！

兄弟睇睇：車殼同車架之間有大空間，點整可以解決問題？

有相喇..........睇睇

Your car is really tough !!!
Why do you paint the yellow & the red colors ?? Anti-rust ??
thx a lot.......

上左色感覺上好睇D，架車又唔捨得粗玩

I mean the bottom wor !?

原帖由 eddywon 於 2007-12-23 23:05 發表

                               
登錄/註冊後可看大圖

I mean the bottom wor !?

eddywon兄

真係好靚.(由其是個碼仔) D力落晒個殼度，小心爆殼.
我都整咗,不過無您整得禁靚
幾時整頂架呀！

bro carman.........would you mind to show us how to secure the shell to the chassis ??........Thx !!

Hey man, the little clamp is bought in MK reclamation street ja.
Surely will improve the anchor la, better built on the chassis.......
I have got a far far way from good skill ar.....

Moreover, my CC-01 chassis is short one and have to buy the VW Touareg to fit the defender shell la..... one more K la.....

I noticed that you use the metal piece from PC case for your rear hanger wor !! good idea wor !!!!

原帖由 minimini 於 2007-12-24 00:36 發表

                               
登錄/註冊後可看大圖

bro carman.........would you mind to show us how to secure the shell to the chassis ??........Thx !!

師兄..

遲吓我想 post 個製作日記, 希望師兄到時比多一意見

原帖由 carmanae86 於 2007-12-24 00:57 發表

                               
登錄/註冊後可看大圖

師兄..

遲吓我想 post 個製作日記, 希望師兄到時比多一意見

wait for your post......

DIY is king !!! DIY is king !!!  

原帖由 eddywon 於 2007-12-24 01:02 發表

                               
登錄/註冊後可看大圖

DIY is king !!! DIY is king !!!  

eddywon兄

您送比我個DIY頂架, 咪種king:victory:

Hi carman,
it's a very rough version, pls make it good by yourself la.
I can find the "rope net" with small "net eye" but it is too cheap....... 140- 6 ft x 60 ft ar..... I wanted to buy it and share with Bros. But this 360 sq.ft. need hundreds of bros sharing ar......

聽完兄弟們意見，拿拿聲改咗個拖車架，未必係最好，但係都唔駛爆殼先！

[ 本帖最後由 eddywon 於 2007-12-24 16:45 編輯 ]