RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1878|回復: 9
打印 上一主題 下一主題
收起左側

The first thing i make for my D90

[複製鏈接]
跳轉到指定樓層
1#
0433351410 發表於 2008-1-18 00:35:05 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
It took me 3 night but not finish yet and not really good
2#
StarBuck 發表於 2008-1-18 00:44:34 | 只看該作者
好令呀
加油喎C兄
3#
eddywon 發表於 2008-1-18 00:51:01 | 只看該作者
spray it to black could improve the outlook anyway.
But, I did the simplest job........ bought one from Jusco 10- market and it's really nice. Post it later time........
4#
 樓主| 0433351410 發表於 2008-1-18 00:54:36 | 只看該作者
原帖由 eddywon 於 2008-1-18 00:51 發表
spray it to black could improve the outlook anyway.
But, I did the simplest job........ bought one from Jusco 10- market and it's really nice. Post it later time........


really which Jusco
5#
eddywon 發表於 2008-1-18 01:19:02 | 只看該作者
Wan Chai Emperor Centre basement lor.....
It's perfect as the toprack but the material is really hard to cut. I pend this job after your trial ar......
6#
eddywon 發表於 2008-1-18 10:34:28 | 只看該作者

十蚊雞頂架

This is the one from Jusco at 10-.

原帖由 eddywon 於 2008-1-18 00:51 發表
spray it to black could improve the outlook anyway.
But, I did the simplest job........ bought one from Jusco 10- market and it's really nice. Post it later time........
7#
edison 發表於 2008-1-18 10:52:32 | 只看該作者
原帖由 0433351410 於 2008-1-18 00:35 發表
It took me 3 night but not finish yet and not really good



I think you should change you solder and the power is over 70W,
All your joint is cool soldering, it is very easy to break!
Here is my exp:
http://bbs.rc-evo.com/viewthread ... page%3D3&page=4

[ 本帖最後由 edison 於 2008-1-18 10:55 編輯 ]
8#
carmanae86 發表於 2008-1-18 20:46:28 | 只看該作者
0433.....師兄;

師兄出手啦!..     個頂架好正喎,  點整.....
9#
 樓主| 0433351410 發表於 2008-1-18 21:34:16 | 只看該作者
原帖由 edison 於 2008-1-18 10:52 發表



I think you should change you solder and the power is over 70W,
All your joint is cool soldering, it is very easy to break!
Here is my exp:
http://bbs.rc-evo.com/viewthread.php?tid= ...


Thanks Edison兄 help
So is that u mean all i need is just buy the solder is over 70W?
Thank You
By the way your 車(織) is really really cool where can you buy the thing to make ar?
thank you again

[ 本帖最後由 0433351410 於 2008-1-18 21:37 編輯 ]
10#
 樓主| 0433351410 發表於 2008-1-18 21:42:01 | 只看該作者
原帖由 carmanae86 於 2008-1-18 20:46 發表
0433.....師兄;

師兄出手啦!..     個頂架好正喎,  點整.....


Carman兄 u 言重ar is just same as edison tell us the way to make it not really hard try try al
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-11-15 01:26 , Processed in 0.034610 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表