Tech Racing DD-MR Question

Hi, I just bought a Tech Racing DD-MR Mini and it doesn't come with motor gear.  It comes with a 102T Spur Gear, does anyone know what kind of motor gear (pitch/tooth count) I need and where can I get them?  The chassis is finished but no motor gear to play!!!  Please help!!!  I planned on using Tamiya black pig for it....
Thanks guys!

64 pitch,
when using Tamiya black pig, 102T Spur Gear w/ 30T~36T will be OK.
1.) if 1/10 touring big wheel/ small track should use smaller motor gear.

2.) if m-chassis small wheel/ big track should use bigger motor gear.

原帖由 billgate803 於 2008-2-9 00:40 發表

                               
登錄/註冊後可看大圖

64 pitch,
when using Tamiya black pig, 102T Spur Gear w/ 30T~36T will be OK.
1.) if 1/10 touring big wheel/ small track should use smaller motor gear.

2.) if m-chassis small wheel/ big track shou ...

Thank you very very much brother billgate803......  you are being a big helper!!

mike
有無d相分享下?^_^

原帖由 mikewu 於 2008-2-9 10:13 發表

                               
登錄/註冊後可看大圖

Thank you very very much brother billgate803......  you are being a big helper!!

show us some pics please!!!!

yes, pls show

pls show us some pic

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

Ha!  Exact the same shell I use....  I was going to paint it before taking photos.....  
Do you have problem putting spacers for the front axles?  I can only put 1 (which instruction says 2) spacers for each wheels...  Can you take closer photos please?  Thanks!!

原帖由 mikewu 於 2008-2-18 17:12 發表

                               
登錄/註冊後可看大圖

Ha!  Exact the same shell I use....  I was going to paint it before taking photos.....  
Do you have problem putting spacers for the front axles?  I can only put 1 (which instruction says 2) spacers  ...

Ground clearance is not sufficient if u mount 2 of them as per instruction mentioned..

原帖由 kawada 於 2008-2-18 17:28 發表

                               
登錄/註冊後可看大圖

Ground clearance is not sufficient if u mount 2 of them as per instruction mentioned..

So what did you do?  Did you only use one?  Please advise.  Thanks!  

原帖由 mikewu 於 2008-2-18 17:38 發表

                               
登錄/註冊後可看大圖

So what did you do?  Did you only use one?  Please advise.  Thanks!  

Yes .. I use 1 shim only..

師兄，架M(DDM)車有無落過地？好唔好玩？