邊到有"架生" 買 ?

邊到有"架生" 買 ? 想用電批換車轆螺絲帽 (7mm), 另一邊接電批 1/4" 頭.....
次次用轆匙, 隻手好痛 !!

鴨街有la.

試過鴨記, 都搵唔到

買支7mm 批好過啦.....  幾十蚊.

一係再慳皮d....搵支鐵支仔, 穿住十字匙黎擰都得.

電批大力又驚收爆, 細力你又要自已番手, 箋攪.

[ 本帖最後由 stanley_wwy 於 2008-2-22 12:03 編輯 ]

呢支批.....夠唔夠力呀......
我早排買咗支.....差唔多V數....最後都換鬼咗......

electric tools are not suitable to rc models...except those heavy duty models...

too easy to damage the screws..or plastic parts

原帖由 chrishkyung 於 2008-2-22 12:03 發表

                               
登錄/註冊後可看大圖

electric tools are not suitable to rc models...except those heavy duty models...

too easy to damage the screws..or plastic parts

有得較力度O既......

ar u sure? I also have this tool but I can sure to say that no torque is adjustable for this tool

I use this electric tool to un-do tighten screws......
If I need to tighten screws, I will use this tool in the beginning and leave the final tightening done by hand because I do not want to 滑牙, 收爆膠. ......

原帖由 chrishkyung 於 2008-2-22 12:06 發表

                               
登錄/註冊後可看大圖

ar u sure? I also have this tool but I can sure to say that no torque is adjustable for this tool

Black & decker had a better version of this tool , with torque adjustment. Price not much difference but release a year later than this version la.

原帖由 stanley_wwy 於 2008-2-22 12:01 發表

                               
登錄/註冊後可看大圖

買支7mm 批好過啦.....  幾十蚊.

一係再慳皮d....搵支鐵支仔, 穿住十字匙黎擰都得.

電批大力又驚收爆, 細力你又要自已番手, 箋攪.

搵支鐵支仔 - 覺得庥煩d 囉, 有時我都會咁做的.
買支7mm 批好過啦 - - 就係賴, 唔想用手囉.

原帖由 chrishkyung 於 2008-2-22 12:06 發表

                               
登錄/註冊後可看大圖

ar u sure? I also have this tool but I can sure to say that no torque is adjustable for this tool

我話有部份可以調整力度.....唔係講呢隻......
我支BOSCH都有得調......

ic......
but anyway, it is better to tighten screws by hand....more accurate

[ 本帖最後由 chrishkyung 於 2008-2-22 14:05 編輯 ]

換呔都厭麻煩同哂力