非常殘的959

Yeah......Since i have one in storage........but it is much stronger and thicker than the original. Good for runner

原帖由 go2usie 於 2008-2-22 19:41 發表

                               
登錄/註冊後可看大圖

hi Bro Bololo~ i had done the Refurbishmentof my 959 too~ i had put on the same 02H motor ~
please dont mind i would upload a lot of pic on your post~
My body is a lot better then yours, i will do t ...

woooo.......good stuff ......

bro susie......you are using the Tamiya 24mm touring car wheels & tyres ??.......

原帖由 go2usie 於 2008-2-22 22:32 發表

                               
登錄/註冊後可看大圖

bro tigar1, u have 959 too ?

i know u have a lot of antique~ lets show them up ~

If you are referring to me then YES, I have a 959. Give me some time to dig up some photos

I love this car, put a celica center differential in it. I think a good center diff is the essence of 959, just like the real 959.

I will look up some picture.

yes Bro mini~

i put on the nowaday 1:10 rally tire and the 26mm wheels.
it required the Hex adapter as Avante does.

the original tire size is strange ... M-size tire is too small .. and 1:10 tire is too big.

原帖由 minimini 於 2008-2-23 01:22 發表

                               
登錄/註冊後可看大圖

woooo.......good stuff ......

bro susie......you are using the Tamiya 24mm touring car wheels & tyres ??.......

waiting for your pictures~

Bro bololo~ just wonder u own both Celica and 959~

do brothers think, we can replace it with the 1:12 Porsche 934 body on our chassis ??
just to adjust the offset of rim.... ??

or this tire size fit the 959 rims ???

934 is not a good fit, the wheel base is not the same.

This is regret the Celica without body!
Any brother have this and willing to transfer to me?
Even old and damaged (not too serious) is fine for me

原帖由 go2usie 於 2008-2-23 14:43 發表

                               
登錄/註冊後可看大圖

do brothers think, we can replace it with the 1:12 Porsche 934 body on our chassis ??
just to adjust the offset of rim.... ??

or this tire size fit the 959 rims ???

Sorry brother, the wheelbase of 934 is 190mm and 959 is around 210mm (measured by myself). Different is too big to fit.

原帖由 bololo 於 2008-2-23 20:10 發表

                               
登錄/註冊後可看大圖

Sorry brother, the wheelbase of 934 is 190mm and 959 is around 210mm (measured by myself). Different is too big to fit.

Hi bro bololo.........how about the width of 959 ?? (when compared with the 934)........ Thx !!

原帖由 go2usie 於 2008-2-22 19:41 發表

                               
登錄/註冊後可看大圖

hi Bro Bololo~ i had done the Refurbishmentof my 959 too~ i had put on the same 02H motor ~
please dont mind i would upload a lot of pic on your post~
My body is a lot better then yours, i will do t ...

very good job, especial the aluminium front and rear arms.
I have 959 too, but one of the broken front arm is lost by a careless guy who said he can copy an aluminium one for me, but..... , I have a nib body set, any bro. has the front arms? I want help!

I have new front arms

原帖由 bololo 於 2008-2-23 20:10 發表

                               
登錄/註冊後可看大圖

Sorry brother, the wheelbase of 934 is 190mm and 959 is around 210mm (measured by myself). Different is too big to fit.

如果係210mm，不如試下搵個M車殼擺落去睇下fit唔fit……

既然個殼condition已經唔太理想，我覺得收埋佢好D，再拎去跑有點兒浪費啊

原帖由 tiger1 於 2008-2-24 01:45 發表

                               
登錄/註冊後可看大圖

I have new front arms

will u sell the arms?

原帖由 minimini 於 2008-2-24 00:03 發表

                               
登錄/註冊後可看大圖

Hi bro bololo.........how about the width of 959 ?? (when compared with the 934)........ Thx !!

Hi! The width of 934 is 167mm and 959 is 172mm (figure from Tamiya club), thanks!

原帖由 go2usie 於 2008-2-23 14:11 發表

                               
登錄/註冊後可看大圖

Bro bololo~ just wonder u own both Celica and 959~

Hi! Brother, yes, I have both since spent very much before.....

原帖由 bololo 於 2008-2-24 10:09 發表

                               
登錄/註冊後可看大圖

Hi! The width of 934 is 167mm and 959 is 172mm (figure from Tamiya club), thanks!

Thx bro......

原帖由 skleejames 於 2008-2-24 01:41 發表

                               
登錄/註冊後可看大圖

very good job, especial the aluminium front and rear arms.
I have 959 too, but one of the broken front arm is lost by a careless guy who said he can copy an aluminium one for me, but.....   ...

Any brother know what kind of plastic of front and rear arm? Since these parts are most easy to be cracked and instant glue is always no function fror them.

原帖由 go2usie 於 2008-2-23 14:10 發表

                               
登錄/註冊後可看大圖

waiting for your pictures~

Ah, I could not retrieve my old 959 with 934 shell pictures....