My Full Options M01 with Monte-Carlo Body Set (09/04 updated)

原帖由 wcypenny 於 2008-3-29 21:58 發表

                               
登錄/註冊後可看大圖

有乜好野先??

The followings are the options parts left and may be I will use it to make another M01M or sell it.

原帖由 wcypenny 於 2008-3-29 21:58 發表

                               
登錄/註冊後可看大圖

有乜好野先??

I forgot to post this photo which is included the body set of Mini Copper Monte-Carlo and some original spare parts of M01.

原帖由 minimini 於 2008-3-29 15:20 發表

                               
登錄/註冊後可看大圖

which shell are you going to use in this car ??........

Just put the Monte-Carlo Body Set and Acto-Tuned M-Special Motor on my Full Options M01.

[ 本帖最後由 tamiyarchk 於 2008-4-7 23:53 編輯 ]

原帖由 tamiyarchk 於 2008-4-7 23:50 發表

                               
登錄/註冊後可看大圖

Just put the Monte-Carlo Body Set and Acto-Tuned M-Special Motor on my Full Options M01.

隻殼好正......

不過隻紅色望落去唔係好夠 "實" .......打多一層白底應該更好......

Can we see the Acto motor? Tks!

原帖由 jas 於 2008-4-9 14:11 發表

                               
登錄/註冊後可看大圖

Can we see the Acto motor? Tks!

This is the Acto motor with Green Motor Cap!

原帖由 tamiyarchk 於 2008-4-9 22:50 發表

                               
登錄/註冊後可看大圖

This is the Acto motor with Green Motor Cap!

Would you please advice the turns of the Acto Motor, thank you!!

原帖由 Sin 於 2008-4-11 23:33 發表

                               
登錄/註冊後可看大圖

Would you please advice the turns of the Acto Motor, thank you!!

The Acto-Tuned M-Special Motor's packing only mentioned - Suitable Pinion Gear 18T!

原帖由 tamiyarchk 於 2008-4-11 23:40 發表

                               
登錄/註冊後可看大圖

The Acto-Tuned M-Special Motor's packing only mentioned - Suitable Pinion Gear 18T!

I read the statement on the package too........

原帖由 Sin 於 2008-4-11 23:44 發表

                               
登錄/註冊後可看大圖

I read the statement on the package too........

But I think this motor is very good to fit on the old M-chassis car like M01 and M02!  It is very light and the size is small.

原帖由 tamiyarchk 於 2008-4-11 23:47 發表

                               
登錄/註冊後可看大圖

But I think this motor is very good to fit on the old M-chassis car like M01 and M02!  It is very light and the size is small.

I had one installed on my M01 Mini!!! BTW, due to the age, do you find the plastic parts connect to the suspension arm start to crack?? My M01 Mini, and M02 Fiat both of them are having this problem.

原帖由 Sin 於 2008-4-12 01:07 發表

                               
登錄/註冊後可看大圖

I had one installed on my M01 Mini!!! BTW, due to the age, do you find the plastic parts connect to the suspension arm start to crack?? My M01 Mini, and M02 Fiat both of them are having this probl ...

Yes, I have the same problem with my M02, luckly I still have the new parts to replace it.  And my M01 has already upgraded to all metal parts by CROSS.

Just see this in the Yahoo Japan auction, it's a modifly parts lot for M01/M02 form Tech Racing and CROSS :

http://page.auctions.yahoo.co.jp/jp/auction/111249507