Hilux+CR01

hihizaza · 發表於 2008-4-19 16:54:00

您需要登錄才可以下載或查看，沒有帳號？新玩家註冊

x

my hilux fit with CR-01 tire.
it is perfect,need to order one more set!!

[ 本帖最後由 hihizaza 於 2008-10-6 12:55 編輯 ]

StarBuck · 發表於 2008-4-19 17:01:35

ONLY買呔呤幾錢?

minimini · 發表於 2008-4-19 17:05:46

looks far more proportional.......

stig · 發表於 2008-4-19 17:06:55

its perfect !!!
how much is the tyre + rim ?

hihizaza · 發表於 2008-4-19 17:08:37

i think about 300-400,total6200yen

stig · 發表於 2008-4-19 17:10:53

not bad , some of the rims for hilux cost more than 6xx in KWS....

hihizaza · 發表於 2008-4-19 17:15:36

原帖由 stig 於 2008-4-19 17:10 發表

 登錄/註冊後可看大圖

not bad , some of the rims for hilux cost more than 6xx in KWS....

yes,this one is cheaper and better!!

cHRisTiAN · 發表於 2008-4-19 17:24:28

wa........真係靚仔.
咁改會唔會好爬左?

hihizaza · 發表於 2008-4-19 17:28:47

just try put it on hilux,not yet play!!

minimini · 發表於 2008-4-19 17:47:45

原帖由 stig 於 2008-4-19 17:10 發表

 登錄/註冊後可看大圖

not bad , some of the rims for hilux cost more than 6xx in KWS....

also these tyres are "original Tamiya" ma.......

txzmxn · 發表於 2008-4-19 18:01:10

looks good!! Much better than original

jas · 發表於 2008-4-19 19:02:03

Do you need to change the axles to longer ones ma?

hihizaza · 發表於 2008-4-19 19:33:23

no need ar!!

i will add a 1mm spacer between the wheel and hexagon!!

[ 本帖最後由 hihizaza 於 2008-4-19 19:35 編輯 ]

go2usie · 發表於 2008-4-19 19:35:55

唔昇高車殼........玩起上黎會"cake"硬沙板~~

hihizaza · 發表於 2008-4-19 19:44:22

just display is no problem,i don't is it cake沙板when playing!!!

jas · 發表於 2008-4-20 16:21:48

原帖由 hihizaza 於 2008-4-19 19:33 發表

 登錄/註冊後可看大圖

no need ar!!
i will add a 1mm spacer between the wheel and hexagon!!

Huh? If you add a spacer, then that makes the axle even shorter wor?
I was wondering if the axle is long enough for the 2.2 wheels.

hihizaza · 發表於 2008-4-21 15:34:23

Hello jas,some photo for your reference!!

it will not touch the edge of ball jont & screw head!!

[ 本帖最後由 hihizaza 於 2008-4-21 15:36 編輯 ]

有勇冇謀 · 發表於 2008-4-21 15:40:16

ONLY DISPLAY ONLY....

落地一定 "cake" 殼....

hihizaza · 發表於 2008-4-21 15:45:11

i will 昇高車殼 5-10mm,is it enough??

nemo · 發表於 2008-4-21 18:05:03

Would the front tyre touch the side bar with full turn? I have this problem with Proline 2.2 wheel and tyre.

		自動登錄	找回密碼
密碼			新玩家註冊