慢爬大轆轉向設定

我都改緊部tlt....tlt真係用來改就超好玩

我決定左做死士，訂一套disconnector (dig) 番黎玩
大家有無意見

原帖由 edison 於 2008-5-12 23:23 發表

                               
登錄/註冊後可看大圖

My motor specifications as below!
HP-Z3025-08

http://www.aircraft-world.com/pr ... p/z30/z3025spec.htm

woo..3025 size...is 40engine power for airplane
how to modifly to mount on 540 motor plate,how about pinion?just drill to 5mm ??

原帖由 sunfffd 於 2008-5-12 23:49 發表

                               
登錄/註冊後可看大圖

我決定左做死士，訂一套disconnector (dig) 番黎玩
大家有無意見

wait.....VF that kit have problem on it...
http://www.rccrawler.com/forum/showthread.php?t=116188

[ 本帖最後由 kaho0338 於 2008-5-13 00:00 編輯 ]

原帖由 kaho0338 於 2008-5-12 23:58 發表

                               
登錄/註冊後可看大圖

wait.....VF that kit have problem on it...
http://www.rccrawler.com/forum/showthread.php?t=116188

it seems like a user problem rather than the product

too large servo end point and burn servo??

AX10 or CR01...any suggestion for me?

原帖由 ipjan 於 2008-5-13 00:34 發表

                               
登錄/註冊後可看大圖

too large servo end point and burn servo??

maybe, and that guys still continues to get some new servos and burn them again
without fixing the problem first

lots of people expressed positive comments about this system
the mechanical parts are held inside a shell, to prevent dust getting in
i think i'm going to give it a shot

原帖由 ipjan 於 2008-5-13 00:38 發表

                               
登錄/註冊後可看大圖

AX10 or CR01...any suggestion for me?

AX10! period!

原帖由 sunfffd 於 2008-5-13 00:38 發表

                               
登錄/註冊後可看大圖

maybe, and that guys still continues to get some new servos and burn them again
without fixing the problem first

lots of people expressed positive comments about this system
the me ...

agree...need carefully to set end point about gear shift..or DIG shift system..

                               
登錄/註冊後可看大圖

i diy frame in 2002...use clod's gear box.twin 13 turn motor

原帖由 ipjan 於 2008-5-13 00:50 發表

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

i diy frame in 2002...use clod's gear box.twin 13 turn motor

join us la brother!!

http://bbs.rc-evo.com/viewthread.php?tid=80014&extra=page%3D1

原帖由 ipjan 於 2008-5-13 00:38 發表

                               
登錄/註冊後可看大圖

AX10 or CR01...any suggestion for me?

ax10 for sure !

原帖由 kaho0338 於 2008-5-13 00:54 發表

                               
登錄/註冊後可看大圖

ax10 for sure !

or get both of them     

SUNFFFD
join u later...i just have savage on hand now...i need buy new ep crawler
i stop play rc car long long time....

AX10 can adjust wheel base....woo...very good function...hahah
simple frame and gear box design and look light weight...
easy buy spare parts in kws??

AX10 can handle some fly jump action??because i like high jump too...

原帖由 ipjan 於 2008-5-13 01:09 發表

                               
登錄/註冊後可看大圖

AX10 can handle some fly jump action??because i like high jump too...

slow move crawler
not recommend for fly jump ....etc

Wow, I found the front dig for real car!!

http://www.youtube.com/watch?v=CPzunPN_Ljs

Good example for front dig in AX10
http://www.youtube.com/watch?v=UzOv5FwMoKc&feature=related