TL01 改M 車一問

請問TL01 可否換M03臂,c座,轉向杯及狗骨....令佢變成166mm 闊?
因為原有TL01闊為192mm, m03 為166mm

[ 本帖最後由 kaho0338 於 2008-6-6 16:02 編輯 ]

原帖由 kaho0338 於 2008-6-6 15:59 發表

                               
登錄/註冊後可看大圖

請問TL01 可否換M03臂,c座,轉向杯及狗骨....令佢變成166mm 闊?
因為原有TL01闊為192mm, m03 為166mm

Yes. What about the wheelbase of the classis?

i have tried once to change TL01 to m cars
you have to buy the A-arms of M03 and 4 dog bones of M03,
Also, you need to " Cut" the Chassis in order to shorten the wheelbase to 210 or 225mm.
If bro you need, i can upload the photo tonight.

thanks all brother ~
i will keep the wheelbase to 257mm, i just want to make the car width at 166mm, because i have a off road body need this special wheelbase and width

hi,  deadmatch
is it only change the arm and dog bone only ? any more ? thanks

nothing except arm and dog bone will need if you just change the width only.
Maybe all you need is shortly (50mm or shorter) oil shock.......

原帖由 deadmatch 於 2008-6-6 18:34 發表

                               
登錄/註冊後可看大圖

nothing except arm and dog bone will need if you just change the width only.
Maybe all you need is shortly (50mm or shorter) oil shock.......

can u share some photo for me as a ref ?
thanks very much ~

[ 本帖最後由 kaho0338 於 2008-6-6 18:37 編輯 ]

Ok, when i back home, i will take some photo for your reference.

原帖由 deadmatch 於 2008-6-6 18:56 發表

                               
登錄/註冊後可看大圖

Ok, when i back home, i will take some photo for your reference.

thanks brother

i am just a kid(teenager) only, it is my honor that i can help you..

sorry bro that my camera has no battery after taking the tlt photo. i will update the m car photo tomorrow

原帖由 deadmatch 於 2008-6-6 23:50 發表

                               
登錄/註冊後可看大圖

sorry bro that my camera has no battery after taking the tlt photo. i will update the m car photo tomorrow

thanks very much bro

see your post, you want to make a land crusier by using TL01 Chassis? Interesting

原帖由 deadmatch 於 2008-6-7 14:23 發表

                               
登錄/註冊後可看大圖

see your post, you want to make a land crusier by using TL01 Chassis? Interesting

yes...with F350 wheel
i think i can make one like this:

                               
登錄/註冊後可看大圖

Fun, i will make a M03 too .

原帖由 deadmatch 於 2008-6-7 02:38 PM 發表

                               
登錄/註冊後可看大圖

Fun, i will make a M03 too .

原帖由 deadmatch 於 2008-6-6 05:08 PM 發表

                               
登錄/註冊後可看大圖

i have tried once to change TL01 to m cars
you have to buy the A-arms of M03 and 4 dog bones of M03,
Also, you need to " Cut" the Chassis in order to shorten the wheelbase to 210 or 225mm.
If bro y ...

Hi Bro~
Still waiting for photo for reference ar!?

sorry that i haven't come home yet.
i will upload them once i get home XD

now with TL01 wheelbase, M03 arm set and 5mm wheel wider ..

the next step is add F350 tire and finish the body

[ 本帖最後由 kaho0338 於 2008-6-7 23:18 編輯 ]

PHOTO UPDATED
SORRY ABOUT THAT SO SLOW

架land cruiser 好正

原帖由 kaho0338 於 2008-6-7 11:08 PM 發表

                               
登錄/註冊後可看大圖

now with TL01 wheelbase, M03 arm set and 5mm wheel wider ..

the next step is add F350 tire and finish the body

唔....
有機會4個轆會刮到車殼....
要再升高