What is the different between XXX4G+ and XXX4G ???
from losi web, the new Graphite Plus version, Team Losi engineers have pushed the performance envelope even further by adding super-lightweight graphite chassis components, a Kevlar spur gear, titanium nitride-coated hinge pins and a whole lot more.
from losi web, the new Graphite Plus version, Team Losi engineers have pushed the performance envelope even further by adding super-lightweight graphite chassis components, a Kevlar spur gear, tit ...
My XXX4 has your mentioned feature but the manual just said XXX4G
i read some report be4 and i think the main different between 2 cars is the graphite chassis, there has more graphite in it and thats why it calls G+, and i cant remember are there any others different between them, sorry about that.
i read some report be4 and i think the main different between 2 cars is the graphite chassis, there has more graphite in it and thats why it calls G+, and i cant remember are there any others differen ...
Thx brother !
hope to see u at TKO in the furture !
as said in the oople web site " The 4+2 cell arrangement probably will put some people off in a similar way that saddle pack 3+3 packs already put people off." .......
Rainbow man !
Have u found a problem that there are a gap in the front A arm , at the chassis side,
I have check the front arm mount, and i cant see the problem, but one side of the arm have a gap about 3mm .
Do u know wass wrong ?
Rainbow man !
Have u found a problem that there are a gap in the front A arm , at the chassis side,
I have check the front arm mount, and i cant see the problem, but one side of the arm have a gap a ...
I just built my XXXG+ last week. I found there're some gaps in the front and rear arms.. moving front & back around 1 to 2mm.....and the front arms are not underloading, the dog bone is rubbing against the oring of the diff hub.....so i was thinking if the car jumps in the air then the dogbone may be scratching against the hub.....
I'm still thinking what color scheme to be used....
I'm using KO VFS 1 Reversable w/ Yokomo 15T, 22/92 ratio...is it good in general? I have not tested it on wheel yet...hehe
How about yours??
I just built my XXXG+ last week. I found there're some gaps in the front and rear arms.. moving front & back around 1 to 2mm.....and the front arms are not underloading, the dog bone is rubbing ag ...
Hello buggy man ! I think u have the same problem as mine, but i just have only one front arm problem.
by the way does VFS1 have reverse function ??
I use to run a XXXS but not too sure about XXX4G+, and i am using brushless and my ratio is decided by the temperature !
about the paint....u can take a look at this !
the original tire & rim are quite tricky for me to do apply CA glue...the tire 'rib' seems quite tight on the rim. The tire cannot sit easily on the rim...anyway, need to paint the body...
Your color scheme is cool.....hope i can make some cool flames on mine too....
your rims are from DB01?
Do you find the shocks are difficult to bleed air? I think mine still have some air traped inside as it sounds like bubbling inside .....i hate building shocks... the tamiya shocks are easier to handle...
I forgot which version is my KO esc, it is the one with reverse function for drifting...VFS2...i'm not sure....
Surely is not VFS haha !
Actually I find Losi shock is better than Tamiya wor
Haha ! More High end stuff .........
To glue tyre u need to cut some edge, i am talking about the inside ribs.
Yes DB01 goes well on Losi, Actually is tamiya copy from some US brand.
The flame is carbon like sticker.
樓主: Evo5
樓主
.....i hate building shocks...
the tamiya shocks are easier to handle...
要幾錢呀？