Team Magic E4JR RTR

我係想如果代理！(不知是否閣下)見到個POST！考慮一下消費者既意見，點解唔買E4！

我又無話有人中傷我！ 依家就真係燥啦！

我留意左架 E4JS 好耐，都好想買！因為個設計真係好唔同，好想試下，但係一問價之下比IFS-R
貴約100玩！

就當佢同價！個D臂碼呀！TRF油壓呀！E4JR/S 又可唔可以有得比較呀！大家都係膠車，ABS有佢既好處，也有脆的壞處！但係架車唔係出黎比人撞呀！耐撞係好，適合新手，但新手又會唔會買架禁貴既車呀！老闆！

E4JS已經貴左，E4JR加左電子野都唔平啦！

大家都係留意左架車好耐，先會係度出POST討論，你就係禁話人地燥！如果唔重視依架新車架都唔會有人討論啦！係你一路既表現就真係覺得你維護架車同燥囉！

[ 本帖最後由 byron.C 於 2008-6-14 12:54 編輯 ]

Bro Blee, if you don't want people to discuss or compare your product. Just don't post.
If you post, that mean it's open to ask and compare. Moreover, people was comparing this car with TA05IFS R, no one is going to 殺人放火, only you keep saying people are 殺人放火 and 燥.

Just my opinion, if I want the car for fun, RTR I'll choose
TamiyaTT01( it's darn cheap, but come with Tamiya's beautiful finished body shell ) or
Kyosho TF5 ( come with Novak ESC, only upgrade the resin universal to alu or steel, it's ready to compete with other) .
To choose these big brands, at least I will have plenty of parts and upgrade supply around KWS.

老馬有火
怒汉推车(TM)

原帖由 blee 於 2008-6-14 07:24 發表

                               
登錄/註冊後可看大圖

不要忘記, Tamiya 係用 ABS 塑料, 非常脆, 不耐撞啲............. 一分錢, 一分貨.

TA05果O的已經唔係用ABS,改用PA膠料好耐,即係尼龍質料.

TM 瘋狂炸版 !

原帖由 AMAT 於 2008-6-14 16:35 發表

                               
登錄/註冊後可看大圖

TA05果O的已經唔係用ABS,改用PA膠料好耐,即係尼龍質料.

Thank you for info, bro.!

I asked Tamiya guy in Tamiya track last time, he told me it's ABS. Therefore, I though it's made by ABS.

原帖由 LeoChan 於 2008-6-15 01:56 發表

                               
登錄/註冊後可看大圖

TM 瘋狂炸版 !

你都係賣 TM 喎......

http://bbs.rc-evo.com/viewthread.php?tid=83184&extra=page%3D1

原帖由 blee 於 2008-6-15 06:30 發表

                               
登錄/註冊後可看大圖

你都係賣 TM 喎......

http://bbs.rc-evo.com/viewthread.php?tid=83184&extra=page%3D1

You new open too Hard sale & 炸版中 ( HK all RC Forum same had your post ! ) !
& I'm not had said this car good or bad & must buy !
So Please come back your RC Study la !

[ 本帖最後由 LeoChan 於 2008-6-16 06:12 編輯 ]

原帖由 朝偉　 於 2008-6-16 06:19 AM 發表

                               
登錄/註冊後可看大圖

agree, d傻仔撩兩撩d司傘就扮mod 機..真係想嘔..而家仲學人做什麼代理..有料就唔洗縮埋係好景樓上啦.

係啦, 呢間 Tekin, Sorex 代理重起 22 樓 tim.

http://www.rchobby.com.hk/contact.htm

原帖由 Motorman 於 2008-6-16 07:06 發表

                               
登錄/註冊後可看大圖

係啦, 呢間 Tekin, Sorex 代理重起 22 樓 tim.

http://www.rchobby.com.hk/contact.htm

Stupid

原帖由 Motorman 於 2008-6-16 07:06 發表

                               
登錄/註冊後可看大圖

係啦, 呢間 Tekin, Sorex 代理重起 22 樓 tim.

http://www.rchobby.com.hk/contact.htm

如果俾到 best price， 我地做消費者又唔拘到 22/F。

原帖由 chungtsai 於 2008-6-16 16:59 發表

                               
登錄/註冊後可看大圖

如果俾到 best price， 我地做消費者又唔拘到 22/F。

講得好岩
只要係平 只係行遠少少
係無所謂既
特別係我呢D窮人

good point
i'll support lower price for sale !
some product can lower wholesale price to sale !

agree! I always get a good price from leochan.

原帖由 chungtsai 於 2008-6-16 16:59 發表

                               
登錄/註冊後可看大圖

如果俾到 best price， 我地做消費者又唔拘到 22/F。

算la! 無謂同人爭論, 公道自在人心!

原帖由 LeoChan 於 2008-6-16 18:22 發表

                               
登錄/註冊後可看大圖

good point
i'll support lower price for sale !
some product can lower wholesale price to sale !

yes !
& Tekin who are you ?

I bought 2 pack of orion 3800mah 30C.
ordered xray T2-007 but cancel order finally.
do you remember???

原帖由 LeoChan 於 2008-6-16 20:35 發表

                               
登錄/註冊後可看大圖

yes !
& Tekin who are you ?

OIC
Thanks support !

原帖由 blee 於 2008-6-15 06:26 發表

                               
登錄/註冊後可看大圖

Thank you for info, bro.!

I asked Tamiya guy in Tamiya track last time, he told me it's ABS. Therefore, I though it's made by ABS.

TT01係ABS,但係TA05一定唔係ABS

田宮個兜會係上面有個MARK,寫住係乜O野物料,TA05原裝係PAGF,即係PA料混玻纖,而輕兜係用PACF,即係混炭纖.

講遙控車啤膠技術,田宮認第二,冇人敢認第一.

TT-01個兜同TA-05個兜拎上手已經好唔同！E4 我未拎過！

不過我都係覺得一樣野！E4JR/S本身不是問題！係賣得貴左囉！