SCUD 09R ---- 1/12 GP Touring

原帖由 blee 於 2008-9-8 06:46 發表

                               
登錄/註冊後可看大圖

對我嚟講, 當然無問題..... 不過唔識改偈嘅朋友, 就非常頭痛啦...

點解頭痛既??

原帖由 piccoengine 於 2008-9-8 23:49 發表

                               
登錄/註冊後可看大圖

點解頭痛既??

Buy one to try and you would understand then.  

原帖由 piccoengine 於 2008-9-8 23:49 發表

                               
登錄/註冊後可看大圖

點解頭痛既??

因為你架Street Spada有食Panado!
所以你之前可以拿TQ同A2!
唔好會食咁多一丁冇益!!

原帖由 McKin 於 2008-9-9 00:03 發表

                               
登錄/註冊後可看大圖

因為你架Street Spada有食Panado!
所以你之前可以拿TQ同A2!
唔好會食咁多一丁冇益!!

佢係我既醫生....

原帖由 piccoengine 於 2008-9-9 00:07 發表

                               
登錄/註冊後可看大圖

佢係我既醫生....

啊, 咁好彩.... 買返嚟副偈已經食咗藥, 抵攞第二啦.........

原帖由 McKin 於 2008-9-9 00:03 發表

                               
登錄/註冊後可看大圖

因為你架Street Spada有食Panado!
所以你之前可以拿TQ同A2!
唔好會食咁多一丁冇益!!

不過藥力唔夠強, 只得 A2.........

原帖由 blee 於 2008-9-9 00:54 發表

                               
登錄/註冊後可看大圖

不過藥力唔夠強, 只得 A2.........

下次可能要食兩粒....
潛艇兄今次玩唔玩呀???

BLEE兄:買咗咁多高台貴手啦!!!

原帖由 leotaigo 於 2008-9-9 03:21 發表

                               
登錄/註冊後可看大圖

BLEE兄:買咗咁多高台貴手啦!!!

唔係好多啫, 你 D collections 少我好多, 可能只係百分之一...........

原帖由 piccoengine 於 2008-9-9 02:43 發表

                               
登錄/註冊後可看大圖

下次可能要食兩粒....
潛艇兄今次玩唔玩呀???

兩粒肯定唔夠, 只少一打...........

09 engine modification:

1) engine crankcase intake bore from 4.x mm to 5.0mm in diameter 入氣孔改為5mm
2) cut crankshaft from circle shape to pendulum shape把架冷尾部由圓形改為鐘擺形(即是其他ENGINE果種形狀

no need to others, the above modification shall be enough for most races.

[ 本帖最後由 Xraylover 於 2008-9-9 22:35 編輯 ]

Hi Mr.Xraylover C-Hing
入氣孔改為5mm-> just drill the intake hole(intake filter part) to 5.0mm???(how to ensure no dust will go inside the engine?...)
把架冷尾部由圓形改為鐘擺形-> take the crankshaft out and just cut!?!?!?(the connecting point of Crankshaft and Piston?)

[ 本帖最後由 donaldt 於 2008-9-9 22:58 編輯 ]

of course, u have to dismentle the engine first.  After enlarging the intake hole, some dust will go to the bearing inside.  If u ar budget user, use WD40 to clean those bearing thoroughly.  If budget is not the problem, replace the engine bearings.    Yes, take it out and just cut.  u can make reference to Blee 09 engine.

原帖由 Xraylover 於 2008-9-9 23:44 發表

                               
登錄/註冊後可看大圖

of course, u have to dismentle the engine first.  After enlarging the intake hole, some dust will go to the bearing inside.  If u ar budget user, use WD40 to clean those bearing thoroughly.  If budget is not the problem, replace the engine bearings.    Yes, take it out and just cut.  u can make reference to Blee 09 engine.

Wow...... Last time you criticized my engine is not good, this time you tell people make reference to my engine.......... 真係唔敢當呀.....

One more thing to tell you...... 個位 A3 先生後來 PM 比我 話我幫佢改個副引擎重喺個盒道, 重未 Break in, 所以上次嘅比賽, 只不過係海軍鬥水兵.  

Blee Hing

Please be clarified that I havent criticized your engine no good.  Please check our previous post.  In the post, u attached a picture and told others your engine win the race.  I only point out your statement is misleading..From all my post, I never comment on your engine...If u want me to comment on your modification, its my pleasure to do so...ooh, the A3 (4 people race) used the stock engine..OIC..then waiting to see u winning the coming race na.

I tell others to make reference to your crankshaft.  It is because it is very easy to find your work product in the internet.  You ar very special one.  In Hong Kong, most RC engine modification craftman never show their product in the internet.  But u will do so.  So as a freshman, the most easy reference is your products.  If u mind, I revise our statement

for the pendulum shape, please make reference to the attached photo

[ 本帖最後由 Xraylover 於 2008-9-10 11:11 編輯 ]

原帖由 Xraylover 於 2008-9-10 11:09 發表

                               
登錄/註冊後可看大圖

Blee Hing

Please be clarified that I havent criticized your engine no good.  Please check our previous post.  In the post, u attached a picture and told others your engine win the race.  I only poi ...

Of course I don't mind.... and I also don't mind you guys criticize me........ my engines whether are good or not, people who have would understand clearly.... 公道自在人心..... I also understand you guys have 吃不到的葡萄是酸的嘅心態.  

原帖由 Xraylover 於 2008-9-10 11:09 發表

                               
登錄/註冊後可看大圖

Blee Hing

Please be clarified that I havent criticized your engine no good.  Please check our previous post.  In the post, u attached a picture and told others your engine win the race.  I only poi ...

are you saying shape that little "dick" part into round shape like shown on the pic?

Xray C-Hing, BLee C-Hing
we are all a bunch of enthusiastic hobby players
there are already very few GP players in HK and even fewer who actually knows how to modify engines(many dont even know how engine works...)
we should have less argument and more union
perhaps we can together figure out the Ultimate Sirio 09 and Spada 09
the 09 is truly an interesting machine with lots of room to improve(chamber angle.. caster angle..)

gooooooooooooooooood

Have stock in HK???