原帖由 joho 於 2008-10-8 15:01 發表
Brother, instead of going down size with your pinion, try going up la.... Brushless with over heat when you under gear too...
Hope that can help 我都有估過會唔會 under, 但有兩個跡象顯示應該唔會係 under:
[1] 摩打齒換細左, 玩既時間亦長左, 21t 捱唔到 3 分鐘, 17t 玩到大約 10 分鐘, 唔係冇電, 而係過熱, 電變 cut off;
[2] 墊高車底, 四輪離地, 空轉試車, run 到冇電都唔會過熱.
所以照估計, 應該係諗辦法降低摩打既負荷, 等佢唔好推得咁辛苦, 咁就冇咁易過熱.. 但 16t pinion 係最細了. 我買唔到 15t 或以下既摩打齒..== |