A210SS

Hi, just finished my A210SS today and test run with 3800mah Lipo + EZRun 35A/3000kv motor and with a mini M6 body shell.
The 3000kv work with the stock gear ratio (31/72T) and can run for almost 20mins under hot weather, the motor is hot after run but it is not too hot.
Speed wise - it is out of my expectation too, it run like a fast 23T.
The stock shock springs are a bit too hard and I use the original rear spring (softer) in the front, and use a Tamiya short blue spring (feel softer than the original rear spring) in the rear, this work for me today but I might try a softer setup later on.
I only add about 40g on the battery side, will need to add more weight next time.

how much for 210

any photo for reference

請看這裡 :lol :lol
http://bbs.rc-evo.com/viewthread.php?tid=96026&extra=page%3D1

Hi, here is the pics, forget the price already as some of the items are with me for long time already.

Hope this is good for your reference.

師兄，見到你有D option喎，頭尾臂碼，轉向金屬等，其實有D咩野加左可以跑好D呀？
仲有呀，用咩Tire 好呀？

組裝後發現皮帶high到個轉向座底部, 請問師兄有此問題嗎?向何解決呢?謝謝.

登錄/註冊後可看大圖

quakequake, shoudbe,

a few suggestions on optional parts :
(1) alloy shock body - original plastic body is not durable and will need service quite often due to leakage
(2) the original plastic steering holder will touch the belt - this happened to mine and one of my friend's kit. You will need to file it, or change to the optional metal part. Both of us changed to the matel part.
(3) change all the plastic spacers (the "shims" for lower a-arm, spacer for shocks on shock towers ... etc) to metal spacers to ensure proper thickness.
(4) I use Lipo and small size electronics (9550, Spektrum micro rx ... etc) and my suggestion is to try softer springs all around with front harder to rear.

I use Spies 40R tires and 5.0mm purple insert, suggested by ActionHobby.
Actually, I run the car in Singapore and this combination works quite well under hot weather. The local track in Singapore is similar to PYC expect that it is EP only.

My 2 cents only, hope this helps.
Ernest

原帖由 ernestf 於 2008-9-30 22:49 發表

                               
登錄/註冊後可看大圖

quakequake, shoudbe,

a few suggestions on optional parts :
(1) alloy shock body - original plastic body is not durable and will need service quite often due to leakage
(2) the original plastic st ...

thx!
第一項我將會做
第二項一定要換合金
第三項己做
第四項我要試試車先,我自己都係用2cells 鋰電.
anyway,thx thx thx a lot

師兄，請問這是什麼車殼？

wht is this shell? which brand? and where can buy it? thanks!!!!!!!!!!!!!!!!!!!!!