RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 2894|回復: 10
打印 上一主題 下一主題
收起左側

Quetion about F-103 TRG wheel tire

[複製鏈接]
跳轉到指定樓層
1#
carlos.fu 發表於 2008-10-20 15:16:22 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
Dear Expert:

I hope you can answer me this quetion la.
IN F-103 RM, i can't change the real tire (right side face at the back of the car) the spur gear will loose if i change a rubber wheel of TRG.
How can i fix it?
Hope all the expert can help me on this la.
Thanks you so much.
2#
ccc_78 發表於 2008-10-20 15:27:08 | 只看該作者
你係唔係講珠叉果份嘢呀??
原裝星星要裝係條軨入面果set彈介???

[ 本帖最後由 ccc_78 於 2008-10-20 15:28 編輯 ]
3#
kwok7660 發表於 2008-10-20 15:31:53 | 只看該作者
係咪壓力啤鈴o果份野重係條舊呔入面, 重未拆出來裝落新呔度呀?
4#
pliablewai 發表於 2008-10-20 16:50:01 | 只看該作者
睇黎都似喇,壓力啤鈴果份野次次換呔都要拎番出黎架
不過我又掉番轉,問題係頭呔,上實哂都有成3mm虛位,你地有無試過
5#
gary 發表於 2008-10-20 17:10:12 | 只看該作者
原帖由 pliablewai 於 2008-10-20 16:50 發表
睇黎都似喇,壓力啤鈴果份野次次換呔都要拎番出黎架
不過我又掉番轉,問題係頭呔,上實哂都有成3mm虛位,你地有無試過

落介子啦,但落左都係有虛位,不過會小D,
死症,係條鈴既問題~~

[ 本帖最後由 gary 於 2008-10-20 17:11 編輯 ]
6#
 樓主| carlos.fu 發表於 2008-10-20 17:15:03 | 只看該作者
Yes, it was the bearing in the bal diff area.
I knew need to put that thing in the wheel, but TRG rubber tire wheel, dont have that place to put it in.
So that's why there not tight up lo.
As Pliablewai said, there will be 3mm or more.

Is that any way to fix it? or there are some part needs to be change?
7#
ccc_78 發表於 2008-10-20 21:06:49 | 只看該作者
原帖由 carlos.fu 於 2008-10-20 05:15 PM 發表
Yes, it was the bearing in the bal diff area.
I knew need to put that thing in the wheel, but TRG rubber tire wheel, dont have that place to put it in.
So that's why there not tight up lo.
As Pl ...

全部裝係出面就ok
頭轆我就無3mm咁鬆,但我都有加介子就好好多

[ 本帖最後由 ccc_78 於 2008-10-20 21:08 編輯 ]
8#
 樓主| carlos.fu 發表於 2008-10-21 19:05:53 | 只看該作者
OK Thanks all.
9#
RC 發表於 2008-10-21 23:13:15 | 只看該作者
原帖由 carlos.fu 於 2008-10-20 15:16 發表
Dear Expert:

I hope you can answer me this quetion la.
IN F-103 RM, i can't change the real tire (right side face at the back of the car) the spur gear will loose if i change a rubber wheel of TRG ...


Front RUBBER tire, rear FOAM tire????? & add the back plate is this run become stable?????

[ 本帖最後由 RC 於 2008-10-21 23:19 編輯 ]
10#
pliablewai 發表於 2008-10-22 04:49:22 | 只看該作者
哈,其實無3mm咁多,攝番0.7mm倒啦,而家好好多喇
11#
 樓主| carlos.fu 發表於 2008-10-22 14:59:27 | 只看該作者
Really? Let me try try sin.
Thanks all expert.
I found out that those bearing must put in the outside of the TRG wheel. There is different with the Tamiya wheel.
Also would like to ask if there are any one playing GTR Evolution (WTCC) pc game?
Im also a gamer on this. Use to play F3000.
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-12-10 22:56 , Processed in 0.033155 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表