I am a beginner to learn how fly the RC Electric Heli. But I have a few questions as belows:
1) I notice that the throttle can be placed at left hand side, is it true ? I read the USA/UK RC Heli
Magazine.
2) But my new RC transmitter is on the right hnad side, can we change it ? I am get used to the left hand side for throttle.
原帖由 mkevin 於 2006-5-28 23:19 發表
Is it poupular to use the throttle at the left hand side ? Why are they different ?
Please advise.
Thanks a lot.
because at usa and europe there model flier would like to control the hobby like the real control stick. one stick can be control aleon and elevator at some axis but the japanese like to control different way
I changed the throttle position from right hand side to left hand side by replace the Spring.
When I swtich on the control, I notice the sound of BEEZE and the SW Warning in the display.
I donit know what happened.
Please advise me what to do. I have the Chinese menu (Taiwan Version) and English Menu (XP9303
Version) But I cannot find how to change the mode. I insist to have the throttle at left hand side as I sometimes go to California, USA. My control is a new one.
Beep Warning : Move all switchs up and Thuttle stick down 1st,this ia default warning .
Beware your helichoper or plane will full thuttle when you start the engine or start the motor.
after you replace the spring ,the thuttle stick will goto middle and your turn on the TX must be got warning .
move the thuttle stick at the lowest positon will be ok .
How to goto stick mode setting :
1:Move the thuttle stick on the lowest position and the switchs all flap up side.
2.PRESS the enter key and turn on the TX same time
3.turn the wheel and your will find the [STICK MODE or / STICK DIRECTION] on the MENU
4.Go in you will see 1,2,3,4 CH position setting .You just select mode 1 / mode 2 is ok .