Mugen MBX7R Eco 定 Xray XB8E

考慮緊買邊部車好，有冇人兩部都玩過？主要飛街同入倉玩，師兄俾啲意見！如果出車以上兩部車邊度出車同買件比較方便

HK 而家呢兩部車乜價位？

Xb8e 大約41xx mpx7r Eco 38xx, 呢個係半年前問既價

Both good price...and so close, tough choice....

I only hv X6R and 808e ... 808e seems slightly bit higher grade (plastic) than x6R, but Mbx6r handle better and easier ...  (Odd layout for 808e) but XB8e seems very diff to xb9 or 808... If only $300 more, I may suggest the Xray, as long as good parts support.

I like MBX7R better if you are running at Lali

上網睇過兩架隻，xb8e 好像多野set啲但架車唔駛點upgrade, MBX7r 雙對比較簡單無咁複雜！兩架都有波子頭轉向未玩過，想問下波子頭既車易set嘛？保養方面有冇野要特別要注意

不如買兩部....跟住平平地放咗冇咁鐘意果新 law ..

DLAM 發表於 2015-2-21 13:45
I like MBX7R better if you are running at Lali

師兄點解會咁推薦呢？兩部你都有玩緊？

965 發表於 2015-2-22 10:57
不如買兩部....跟住平平地放咗冇咁鐘意果新 law ..

無咁多彈藥出哂兩部，因為而家只出kit同servo就搞掂，電變摩打已經有係手

請問對TLR 3.0e buggy 有何評價，比起xb8e 2015 如何？零件是否易搵？

3.0 has better (more modern) layout, and lower CG .... Very good quality too, but Xray still has edge in material ... I like it as it is slimmer, better looking....
但講講吓仲有 Tekno, Snake...etc...

By the way, HK 有冇 SWorks S350? 部車好靚仔，又平....

蛇仔之前玩過，都係好車一部，但想轉下波子頭既車玩所以讓左俾朋友。Swork都有留意呢部車，但香港買佢仲難搵過Mugen

請問xray parts 係吾係易搵過Losi，聽聞losi香港代理零件來貨吾穩定

losi好似只有快捷代理，零件及車好多時都要訂!所以我只考慮mugen或xray

明白！吾該師兄

965 發表於 2015-2-23 04:08
3.0 has better (more modern) layout, and lower CG .... Very good quality too, but Xray still has edg ...

17f 有s350 ,2xxx 元，不過parts 要訂

今日終於解毒，最後揀左XB8e!

jj2006 發表於 2015-2-24 21:42
17f 有s350 ,2xxx 元，不過parts 要訂

扺玩 wor .... (視乎二千頭定尾) .. 其實 17 ft 即係邊樹?  Thx u ... Thx ..

想試部 S350 好耐 .. 好鬼靚仔!

有冇 parts 都冇所謂la,  我係 艱難大 除非 Traxxas, 否則都係上綱訂 parts ..  

benz1625 發表於 2015-2-25 00:24
今日終於解毒，最後揀左XB8e!

埋單幾錢?

車架41xx，搵唔到savox 1256轉買左隻1267行7.4v又俾多一舊，連埋其他工具埋單5k內! 又跌錢