請門有冇越野貨車？

請門有冇越野貨車？即係DAKAR達卡越野拉力賽果d貨車咁樣

原帖由 Paul77 於 2007-9-18 20:36 發表

                               
登錄/註冊後可看大圖

請門有冇越野貨車？即係DAKAR達卡越野拉力賽果d貨車咁樣

DIY with 1/14 trucks law....

How's that?  

原帖由 mikewu 於 2007-9-18 21:01 發表

                               
登錄/註冊後可看大圖

How's that?  

師兄   差2支大煙通o

Mud nei gar!!   nice wor!!

mikewu
係呀係呀！類似呢d啦

[ 本帖最後由 Paul77 於 2007-9-18 21:48 編輯 ]

where we can buy this model?

原帖由 <i>aul77</i> 於 2007-9-18 21:46 發表
係呀係呀！類似呢d啦

自己改架,成本都幾高下

It's not mine...... I download it from tamiya club......
But it's a combination of CC01 chassis with 1/14 truck heads....  it's EASY!!!

Another one... combination of F350 and 1/14 truck head......  

好正呀 小弟也正在開發6x6越野貨車，預產期要四個月

原帖由 mikewu 於 2007-9-18 22:31 發表

                               
登錄/註冊後可看大圖

Another one... combination of F350 and 1/14 truck head......  

looks really good !!...... but the CG is very high......easy to cup 4 ......

f350個車身底盤都幾重，就算是車身較高，只要路面唔太斜(貨櫃內重野唔好放咁高)，都可應付到，當然冇得同輕盈越野車比較啦

我仲以為 MIKE 兄係度放毒

原帖由 mikewu 於 2007-9-18 22:31 發表

                               
登錄/註冊後可看大圖

Another one... combination of F350 and 1/14 truck head......  

This one very good, even I hate the F350 chassis, but this one is really outstanding!!

原帖由 mikewu 於 2007-9-18 22:31 發表

                               
登錄/註冊後可看大圖

Another one... combination of F350 and 1/14 truck head......  

Mike, I think this truck had nothing from F350....

原帖由 orange00 於 2007-9-19 21:17 發表

                               
登錄/註冊後可看大圖

Mike, I think this truck had nothing from F350....

REALLY?!  What is it?  Looks kinda like the F350 bor... I just say it because I see the leaf springs....