RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: PRO-TEN 專區 [打印本頁]

作者: raymomo 時間: 2010-12-26 01:08
標題: PRO-TEN 專區
本帖最後由 raymomo 於 2010-12-26 01:29 編輯

[attach]447565[/attach][attach]447566[/attach][attach]447567[/attach][attach]447574[/attach][attach]447573[/attach][attach]447568[/attach][attach]447575[/attach]希望有PRO-TEN嘅師兄入黎交流一下及post下相咁！因為真係好好玩！

作者: bennymo 時間: 2010-12-26 01:34
mastermind pick-up, 真係靚到冇朋友

作者: raymomo 時間: 2010-12-26 01:40
回復 2# bennymo

THANKS CHING!!

作者: ae110hk 時間: 2010-12-26 01:45
8.5 turbo? s100 咩價位到? 吠難搵嗎?

作者: raymomo 時間: 2010-12-26 01:50
回復 4# ae110hk

NOW CHANGE TO LRP X12 4T ALREADY!!HAHA S100 ABOUT $2250

作者: ae110hk 時間: 2010-12-26 01:52

回復 ae110hk

NOW CHANGE TO LRP X12 4T ALREADY!!HAHA S100 ABOUT $2250
raymomo 發表於 2010-12-26 01:50

登錄/註冊後可看大圖

very nice car!!!

作者: raymomo 時間: 2010-12-26 01:54
回復 6# ae110hk

CHING U WANNA TRY IT! IT REALLY FAST AND GOOD CONTROL!

作者: JohnnyC 時間: 2010-12-26 02:15
http://bbs.rc-evo.com/viewthread ... &extra=page%3D2
here is my X10! pls share !

作者: raymomo 時間: 2010-12-26 02:17
回復 8# JohnnyC

CHING !! POST PHOTO HERE LA!! HAHA

作者: JohnnyC 時間: 2010-12-26 02:21
here you are, thanks! [attach]447597[/attach][attach]447598[/attach][attach]447599[/attach]

作者: bennymo 時間: 2010-12-26 02:21
嘩... 架架都堅靚呀!

作者: raymomo 時間: 2010-12-26 02:25
回復 10# JohnnyC

WOOOO!! GREAT PAINT JOB WOR JOHNNY CHING!!!

作者: ae110hk 時間: 2010-12-26 04:09

回復 ae110hk

CHING U WANNA TRY IT! IT REALLY FAST AND GOOD CONTROL!
raymomo 發表於 2010-12-26 01:54

登錄/註冊後可看大圖

I'm playing r5.1 too that's real fast also haha, but only last 8-10mins run, so i wanna try pro 10 turbo maybe can run up to 15mins right?

作者: bowielum 時間: 2010-12-26 09:57
正到暈

作者: raymomo 時間: 2010-12-26 10:31
回復 13# ae110hk

Oic! If u try pro ten 8.5t without turbo u must run over 15 mins !

作者: johncoltrane 時間: 2010-12-26 11:03
c hing, I have a s100 too, would like to know wat gear combination do you use for your 8.5T and 4T motor respectively? and do you refer to any gear ratio chart?

作者: raymomo 時間: 2010-12-26 12:13
回復 16# johncoltrane

For 8.5t. 96/26, 4t 98/19 but the 4t still checking the gear ratio! Anyway show show ur car here and will u go jv play together ? Haha

作者: abcde 時間: 2010-12-26 14:16
4t motor really very very fast if use 2s lipo....i suggest try 1cell lipo....it will like those 1/12 playing 1cell ....good is less weight and have more good control and tire will lose less also.....
we play at sat morning yesterday.....and my leman body almost finish

<========another know where have this body on sale ?

作者: raymomo 時間: 2010-12-26 14:58
回復 18# abcde

Cannot la coz the esc just support 2s lipo!! Haha

作者: raymomo 時間: 2010-12-26 15:28
回復 18# abcde

Red star!

作者: abcde 時間: 2010-12-26 17:11
really ? how much and still have stock ??
if still have...fast fast go to check it out .....

作者: johncoltrane 時間: 2010-12-26 23:25
better show u later as i have my motor mount broken and still waitin for the parts, i think it will arrive next week, join u later! when do u go to JV usually?

作者: raymomo 時間: 2010-12-27 00:35
回復 21# abcde

$170 still have stock today!go quick ar ching!haha

作者: raymomo 時間: 2010-12-27 00:36
回復 22# johncoltrane

Yes ar! Red star said parts will coming on this week!

作者: raymomo 時間: 2010-12-27 00:38
回復 22# johncoltrane

Almost every sat evening !

作者: abcde 時間: 2010-12-27 00:39
本帖最後由 abcde 於 2010-12-27 00:47 編輯

$170?

<=====do you know how much I buy this
$98 in 1/f

i don't think US dollar is high in this period compare with yen......wt .............f of those business man....better forget it.

..
and i know why still have stock...

作者: raymomo 時間: 2010-12-27 01:20
回復 26# abcde

Haha one for two! Ching 1/f no more for a long time! We will go jv today moring! Will u coming? 11:00 am

作者: mikuro 時間: 2010-12-27 16:45
回復 10# JohnnyC

Hi Johnny, would like to know your comment to the xray X10 link car? Thanks ^^
Did you try running at JV before ?

作者: JohnnyC 時間: 2010-12-27 19:26
i played few times la, its running good! if you wanna get one, you may consider Serpent or CRC also, they may easier to get parts compare to x ray!

作者: mikuro 時間: 2010-12-27 21:28
本帖最後由 mikuro 於 2010-12-27 21:53 編輯

回復 29# JohnnyC

Hi Johnny, thanks for advise.
In general, I think those brand would be similar in supplying the spare parts.
In my case, I would choose Xray since I have the XII link car and they can share some parts as well. ^^

作者: JohnnyC 時間: 2010-12-27 21:36
回復 30# mikuro

yes its true, just think of the availabilty of spare parts!

作者: mikuro 時間: 2010-12-27 21:46
回復 31# JohnnyC

Btw, will you try playing at JV? It would be fun ^^

作者: mikuro 時間: 2010-12-27 22:07
回復 31# JohnnyC

Also, which brand tires and what is the outer dia. for the rear tires you are using? Thanks !

作者: JohnnyC 時間: 2010-12-28 00:47
回復 32# mikuro

I played few times at JV already!

作者: JohnnyC 時間: 2010-12-28 00:49
回復 33# mikuro

We are just for fun, don't care about the tire dia., we using Xceed front and rear tire set, I using front mid, rear mid......and my frds are using front mid, rear soft!

作者: mikuro 時間: 2010-12-28 00:59

回復 mikuro

We are just for fun, don't care about the tire dia., we using Xceed front and ...
JohnnyC 發表於 2010-12-28 00:49

登錄/註冊後可看大圖

Thanks Johnny ^^

作者: JohnnyC 時間: 2010-12-28 01:06
回復 36# mikuro

You are welcome, just let us know when you decided to join! hahaha...cheers

作者: raymomo 時間: 2010-12-28 01:36
回復 18# abcde

Wai gor! I played with 3 rock ching today and I already try the 4T motor with s100! It really super fast! Haha super Ho Ho 玩！buy pan car la!

作者: raymomo 時間: 2010-12-28 02:41
回復 36# mikuro

Ching just get it!it can share parts with ur XII and the tire really can use a lot of time!haha buy one and play with us in Jv la! Really very funny!hope see u soon!

作者: raymomo 時間: 2010-12-28 02:45
回復 36# mikuro

One more things! Really like your master piece model! Haha really amazing! Looks like a real car everyone !

作者: mikuro 時間: 2010-12-28 09:06
回復 37# JohnnyC

Okay ^^

作者: mikuro 時間: 2010-12-28 09:10
回復 39# raymomo

At first, I am thinking of the S100 but yes, and it is the reason I would choose Xray X10 link since I would share parts between the XII link as well.

Btw, Ching, would there be any 1/10 body shell found in KWS? Thanks !

作者: mikuro 時間: 2010-12-28 09:13
本帖最後由 mikuro 於 2010-12-28 14:23 編輯

回復 38# raymomo

Yes, wai gor, 3rock and fyin is nice and they are playing very well. Hope to get 1/10 pan car to join the party soon ^^

作者: mikuro 時間: 2010-12-28 09:23
回復 40# raymomo

Thanks for comment.
I will take a rest from car modeling and now switching to RC again. RC is really fun ^^

作者: mikuro 時間: 2010-12-28 09:43
回復 1# raymomo

Ching, could you tell me what is the width of this body shell? Which brand is it? Thanks ^^

登錄/註冊後可看大圖

作者: raymomo 時間: 2010-12-28 09:59
回復 42# mikuro

X10 I play before & serpent s100 playing now! In between of those cars X10 is more easy to adjust everything and the matel parts is better but S100 is more fast to order the parts! Because Im not a ( high hand) so I need always repair my car and can't wait too long for the parts that is I choose the serpent reason! Hahaha if u can wait I suggest u take the CRC LE! I will also buy one more pan car fr this brand!

作者: raymomo 時間: 2010-12-28 10:03
回復 44# mikuro

Haha! Really well come back to Rc world! We do all come back to Rc fr a few months ago!very funny & waste money!

作者: raymomo 時間: 2010-12-28 10:05
回復 45# mikuro

The shell fr photofrom 220mm easy to find at red star !just the rear side a little b wider!

作者: raymomo 時間: 2010-12-28 10:07
回復 43# mikuro

Until now I just know wai gor & 3rock ! Still can't see fyin ! Hope can see him asap! Haha

作者: mikuro 時間: 2010-12-28 10:35
回復 48# raymomo

Thanks man ^^

作者: abcde 時間: 2010-12-28 14:17
hi guys....nice to meet yours in JV playing pan car (but mine is only a f103

)
this sat (1/1/11) play on morning if weather is good...
copy to rock and franics..if see this message..comfirm me this sat OK or not.....
compare with all 1/10 pan car (snake....xray...and CRC....) I still suggest CRC as the parts and quality seen the better one...also know top should be releases there 12son soon ...may be 1/10 pan car also release at the same period..therefore...one more choice.......

作者: mikuro 時間: 2010-12-28 15:06
回復 51# abcde

Noted and thanks wai gor ^^

作者: raymomo 時間: 2010-12-29 09:51
回復 51# abcde

I m waiting the CRC too! Wanna buy one more! Haha hope I can join on 1/1/11! Cheers

作者: IS520 時間: 2010-12-29 10:20
HI, abcde

Morning means 09:00~11:59 ?
I want to have a trial run for my F104.

回復 51# abcde

作者: abcde 時間: 2010-12-29 10:28
me should be around 10 am to around 3 pm ....

作者: 3rock3rock 時間: 2010-12-29 12:14

me should be around 10 am to around 3 pm ....
abcde 發表於 2010-12-29 10:28

登錄/註冊後可看大圖

1/1/2011 is fine by me.
Start from ~10:00am...
Vintage Trinity EVO10 (235mm) and Hyperdrive (200mm)

作者: airyu 時間: 2010-12-29 22:01
hey Raymomo

where could you find the parts for your serpent s100?

回復 mikuro

X10 I play before & serpent s100 playing now! In between of those cars X10 is ...
raymomo 發表於 2010-12-28 09:59 AM

登錄/註冊後可看大圖

作者: raymomo 時間: 2010-12-30 00:04
回復 57# airyu

Order it fr (red star)! If they have stock just about few days u can get it!

作者: kamlo713 時間: 2010-12-30 10:14
[attach]448880[/attach]

作者: raymomo 時間: 2010-12-30 11:36
回復 59# kamlo713

CRC LE? When come join us ,Ching ?I love in it!

作者: mikuro 時間: 2010-12-30 13:34
回復 59# kamlo713

Hi Ching, what motor turn are you using? Are you using 2S-lipo? Thanks ^^

作者: iggihk 時間: 2010-12-30 16:18
I have a CRC gen-X with 235mm kit put together 7 months ago, but I still haven't put it on the ground....

I will test it on the coming week in JV (and that will be my first time there), hopefully it will not fallen apart...

作者: abcde 時間: 2010-12-30 16:21

I have a CRC gen-X with 235mm kit put together 7 months ago, but I still haven't put it on the groun ...
iggihk 發表於 2010-12-30 16:18

登錄/註冊後可看大圖

hi ching...when will you go to play that 235 CRC...my friend also play 235 but a vintage trinitry.....yours may play together la...
we plan play on coming sat morning 1/1/11 around 10am ....welcome to join us ....

作者: mikuro 時間: 2010-12-30 16:47
回復 62# iggihk

Great! Would you mind showing us the picture of your car? Thanks ^^

作者: airyu 時間: 2011-1-5 23:46
are most of the pan car now 200mm width ? does any brand still produce 235 mm width pro 10?
i personally think a pro 10 should has a wide rear wheel width.

作者: mikuro 時間: 2011-1-6 09:10
本帖最後由 mikuro 於 2011-1-6 10:12 編輯

回復 65# airyu

Nowadays, 1/10 pan car are generally of 200mm.
If you want to play 235mm chassis, you may consider CRC GEN-X10LE together with its 235mm conversion kit. ^^
http://www.teamcrc.com/crc/modul ... order=0&thold=0

作者: abcde 時間: 2011-1-6 12:13

are most of the pan car now 200mm width ? does any brand still produce 235 mm width pro 10?
i pers ...
airyu 發表於 2011-1-5 23:46

登錄/註冊後可看大圖

yes...you are right..some ching said before
1/10 200mm pan car named as Pan car
but 1/10 235mm size then named as a PRO ten

作者: abcde 時間: 2011-1-6 12:17
本帖最後由 abcde 於 2011-1-6 13:10 編輯

but we normal like to say this kind of car is a pro ten then.....

作者: raman9551 時間: 2011-1-6 12:18
我都係CRC加咗235套kit, 但都未落過地

作者: 3rock3rock 時間: 2011-1-6 12:21
回復 69# raman9551

My friends and I will play pan car (200mm and 235mm) on this SAT morning

作者: mikuro 時間: 2011-1-8 20:04
本帖最後由 mikuro 於 2011-1-8 20:24 編輯

Would like to ask those Ching who had played Protoform P905B shell.

Is the rear end plates included? Or need DIY from the lexan off-cut ?

登錄/註冊後可看大圖

Please advise ^^

作者: mikuro 時間: 2011-1-8 20:13
235mm conversion kit for XRAY X10 ^^

登錄/註冊後可看大圖

http://www.redrc.net/2011/01/nit ... 5mm-conversion-kit/

作者: airyu 時間: 2011-1-8 22:10
回復 72# mikuro

作者: airyu 時間: 2011-1-8 22:10
回復 72# mikuro

oo,, good news for pro 10 fans

作者: mikuro 時間: 2011-1-9 16:28
回復 74# airyu

Unless you really want to play with X10, this conversion kit is not cheap (90 EUR) >_<

作者: 蛇打七吋 時間: 2011-1-10 10:03
Ching 們 crc頭上A臂好緊！應該點做？thx

作者: raymomo 時間: 2011-1-10 21:29
回復 76# 蛇打七吋

我亦發現同一問題、但昨天試車走了幾後沒什麼大問題！

作者: 3rock3rock 時間: 2011-1-11 13:56
回復 77# raymomo

CRC LE right?

作者: raymomo 時間: 2011-1-11 14:12
回復 78# 3rock3rock

Yes! Crc le and would u mind suggest the gear ratio if I using the 48pitch spur with8.5 turn turbo? Haha thanks Nelson !

作者: mikuro 時間: 2011-1-11 14:14
本帖最後由 mikuro 於 2011-1-11 14:36 編輯

回復 77# raymomo

Hi Ray 兄, can you show me some pictures on your X10 LE? Thanks ^^

作者: 3rock3rock 時間: 2011-1-11 14:32
Ray,
I have no ideal about how different is the car perform with turbo.
May be other Ching playing with ESC with turbo can help.
Looking forward to racing with you and your friends.
Cheers,
Rock

作者: raymomo 時間: 2011-1-11 16:02
回復 80# mikuro [attach]453051[/attach][attach]453052[/attach][attach]453053[/attach][attach]453054[/attach][attach]453055[/attach][attach]453056[/attach]

作者: raymomo 時間: 2011-1-11 16:06
回復 81# 3rock3rock

Rock,
thanks frist!it doesn't matter, hope play with u asap too!haha
just tell me what gear ratio u r using now with ur 9t pancar?thanks a lot!!

作者: abcde 時間: 2011-1-11 16:13
正呀......crc le......點解用到9551 ge ? 改235 用p905b..好型.....
條蛇點解無左條尾?

試左車末 ?
玩唔玩星期日....
http://bbs.rc-evo.com/viewthread ... &extra=page%3D1

作者: hihizaza 時間: 2011-1-11 16:17
哇！Ray兄，你玩哂啦，三部都玩過！勁！

作者: mikuro 時間: 2011-1-11 16:35
本帖最後由 mikuro 於 2011-1-11 16:37 編輯

回復 82# raymomo

Nice car !!
You should put your X10 together with GenX10LE and S100 ^^

作者: raymomo 時間: 2011-1-11 17:03
回復 84# abcde

9551 要改少少位先裝到！你都買左嘞偉哥？星期日應該到唔到但星期六晚會到！

作者: raymomo 時間: 2011-1-11 17:05
回復 86# mikuro

Xray already trade to my fd!Ching when can play with u?

作者: raymomo 時間: 2011-1-11 17:11
回復 85# hihizaza

Ching 係呀三架都玩過係勁呀！不過係使錢勁嗰個勁咁解！哈哈

作者: hihizaza 時間: 2011-1-11 17:13

回復 raymomo

Nice car !!
You should put your X10 together with GenX10LE and S100 ^^
mikuro 發表於 2011-1-11 16:35

登錄/註冊後可看大圖

明晚得唔得呢？

作者: hihizaza 時間: 2011-1-11 17:17

回復 hihizaza

Ching 係呀三架都玩過係勁呀！不過係使錢勁嗰個勁咁解！哈哈
raymomo 發表於 2011-1-11 17:11

登錄/註冊後可看大圖

確係玩到驚！

作者: mikuro 時間: 2011-1-11 17:17
本帖最後由 mikuro 於 2011-1-11 17:19 編輯

回復 88# raymomo

Normally, I will play my 1/12 at JV on SAT / SUN.
Hope to play with you guys soon ^^
I am still waiting for CRC GENX10LE (no stock) ><

作者: billgate803 時間: 2011-1-11 17:25

回復 mikuro
raymomo 發表於 2011-1-11 16:02

登錄/註冊後可看大圖

嘩~ 部新款CRC GENX10 LE好型AR~~
洗唔洗$2000?? THX

作者: abcde 時間: 2011-1-11 17:26

回復 abcde

9551 要改少少位先裝到！你都買左嘞偉哥？星期日應該到唔到但星期六晚會到！
raymomo 發表於 2011-1-11 17:03

登錄/註冊後可看大圖

無呀....講下je.....一買就一濶三大啦....玩下f103 先啦....試左3cell a123 宜家快左少少啦...
咁下一次一齊玩啦...

作者: mikuro 時間: 2011-1-11 17:27

嘩~ 部新款CRC GENX10 LE好型AR~~
洗唔洗$2000?? THX
billgate803 發表於 2011-1-11 17:25

登錄/註冊後可看大圖

15XX

作者: fyin 時間: 2011-1-11 17:28

回復 3rock3rock

Rock,
thanks frist!it doesn't matter, hope play with u asap too!haha
just tel ...
raymomo 發表於 2011-1-11 16:06

登錄/註冊後可看大圖

Hi Ching,
for your reference
我用9T 配64pitch齒
98T/20T Gear ratio 4.9

作者: raman9551 時間: 2011-1-11 17:29
吓! 平過之前嗰款?

作者: raymomo 時間: 2011-1-11 17:38
回復 92# mikuro

Cat shop said will re-stock car and parts at the end of this month!

作者: mikuro 時間: 2011-1-11 17:45

回復 mikuro

Cat shop said will re-stock car and parts at the end of this month!
raymomo 發表於 2011-1-11 17:38

登錄/註冊後可看大圖

Thanks for info. ^^

作者: raymomo 時間: 2011-1-11 17:59
回復 97# raman9551

因之前個部係pro版！好多件都靚d,所以貴d!

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)