聽講星星"馴馬師-Rough Rider"會出復刻版

好消息!!!!!
聽講星星"馴馬師-Rough Rider"會出復刻版, 真係好消息, 唔知要等幾內哩??
跟住就係HotShot 同.................

從一個台灣絕版車綱撮過來的:

(曾經跟TAMIYA內部人員提過台灣的遙控古董車收集市場等諸多情形,他們覺得價格高得不可思議, 因為他們說TAMIYA的創業精神就是要實現兒時夢想,推出這些復刻模型無非也是如此,所以我樂見其成喔.....

                               
登錄/註冊後可看大圖

)

http://www93.sakura.ne.jp/~time-tunnel/06-11-19-1.html

原帖由 Sps 於 2008-3-3 00:22 發表

                               
登錄/註冊後可看大圖

how about shipping cost ?

the body set is not heavy. shipping around 2500yen

原帖由 peter7 於 2008-3-3 00:06 發表

                               
登錄/註冊後可看大圖

In Japan Rough Rider(馴馬師) body set worth around 30000yen=HK$2500
Sand Scorcher around 60000yen=HK$4800

how about shipping cost ?

In Japan Rough Rider(馴馬師) body set worth around 30000yen=HK$2500
Sand Scorcher around 60000yen=HK$4800

[ 本帖最後由 peter7 於 2008-3-3 00:09 編輯 ]

原帖由 BUNNYYUEN 於 2008-3-2 22:40 發表

                               
登錄/註冊後可看大圖

嘩咁我咪發達,馴馬師殼連合我有,FORD殼我都有,仲要連盒未砌,邊個要,開個價黎聽聽

NIB body set around HKD$5000+

原帖由 BUNNYYUEN 於 2008-3-2 22:44 發表

                               
登錄/註冊後可看大圖

馴馬師原裝泵把值幾錢？

black or grey ?

馴馬師原裝泵把值幾錢？

嘩咁我咪發達,馴馬師殼連合我有,FORD殼我都有,仲要連盒未砌,邊個要,開個價黎聽聽

Hi Bro,
過萬銀, 淨係個全新殼(body set)就已經買5~6仟港元.

依家馴馬師出面話梗天價即糸幾多錢？

XR311 metal parts are mostly stamped aluminium, which is rather easy to do.

Rough rider and SRBs are made of mostly cast magnesium low fusing (temperature) alloy. his involve the manufacturing of molds and casting, finishing and making those screw holes. A few more little steps.

but xr311 only made of bended metal sheet, are the process same as injection mould? don't know, just think if these is ok, rough rider and hi-lux should not same as XR311, mostly will heat.

原帖由 fat_fat_cat 於 2008-2-21 17:34 發表

                               
登錄/註冊後可看大圖

I don't know, but seen tamiya never re-issue metal main parts r/c car before, and heard before that the metal mould is not belong to them, don't know, sure I want they can re-issue, but re-issue the o ...

There is one...the XR311 with metal chasis.  It is over $1000 and I believe the sale was not very good.  I had seen it on the shelves in the RC shops for years, before they were finally sold out.

I don't know, but seen tamiya never re-issue metal main parts r/c car before, and heard before that the metal mould is not belong to them, don't know, sure I want they can re-issue, but re-issue the old design will be the best.  plus sorry, the time past too fast, see that qd rough rider as 'new release' when in japan, but last july.....

會唔會係復刻1/10馴馬師呀，fat_fat_cat 兄提供0個幾部都出0左大半年

FYI
http://www.tamiya.com/english/products/56707buggy_champ/index.htm

same as frog, hornet and fox.....

Any new update about what chassis will be? really use frog's chassis plus 馴馬師 body?

可惜唔係原版復刻!

睇到呢個 post .... 真開心, 馴馬師出復刻.

熱烈期待馴馬師出復刻