Top Force and TA01

I just read the Top Force manual and noted that I can convert my old TA01 (which with the graphite two layer boards) to it without involving significant amount of work. I check that what I need at this moment is the front and rear arms and shells.

Who know where I can buy the front and rear arms and shell of Top Force (or Mantaray)?

But what is Yop force? Please advice.

Hi Ryan,

Top force is same platform with Tamiya Manta Ray,  you can go for Wai go just order the front and rear suspension arms, also dog bones also.. you can try for Ebay to search around for the top force body shells, i know somebody selling in good price. Another option is buy a Manta kit for convert it at Top force and save for the left parts for spare.. hope this help...

good luck

原帖由 beat 於 2007-8-19 10:06 發表

                               
登錄/註冊後可看大圖

Hi Ryan,

Top force is same platform with Tamiya Manta Ray,  you can go for Wai go just order the front and rear suspension arms, also dog bones also.. you can try for Ebay to search around for ...

ummm......but placing an order in Waigo at least need to wait for 2 months wor.....need a bit of patience........

原帖由 beat 於 2007-8-19 10:06 發表

                               
登錄/註冊後可看大圖

Hi Ryan,

Top force is same platform with Tamiya Manta Ray,  you can go for Wai go just order the front and rear suspension arms, also dog bones also.. you can try for Ebay to search around for ...

Thanks bro Beat. Very informative.

原帖由 ryancmlam 於 2007-8-18 23:47 發表

                               
登錄/註冊後可看大圖

I just read the Top Force manual and noted that I can convert my old TA01 (which with the graphite two layer boards) to it without involving significant amount of work. I check that what I need a ...

Hello,
Why u don't buy a manta ray? only HK$5xx

原帖由 billgate803 於 2007-8-24 00:21 發表

                               
登錄/註冊後可看大圖

Hello,
Why u don't buy a manta ray? only HK$5xx

As mentioned, I got the TA01 with graphite board and want to use rather than keep them.

原帖由 ryancmlam 於 2007-8-24 08:33 發表

                               
登錄/註冊後可看大圖

As mentioned, I got the TA01 with graphite board and want to use rather than keep them.

Rather than placing order at WAI GO for the arm set, i would jsut suggest you to go and get a Manta Ray, that way will be more time saving~~

原帖由 jpmontoya2 於 2007-8-24 09:42 發表

                               
登錄/註冊後可看大圖

Rather than placing order at WAI GO for the arm set, i would jsut suggest you to go and get a Manta Ray, that way will be more time saving~~

Thanks for the advice. I think it is better to play my DF03

Bro Susie,

As discussed, picture of my TA01 two-layer graphate board is attached.

Ryan

[ 本帖最後由 ryancmlam 於 2008-4-13 21:54 編輯 ]

You play top force also Ryan!!

原帖由 explorer888 於 2008-4-13 22:00 發表

                               
登錄/註冊後可看大圖

You play top force also Ryan!!

Someone want to "posion" me. I am struggling.

Ryan, it is a top force chassis kit.

Lets go~

原帖由 go2usie 於 2008-4-13 22:47 發表

                               
登錄/註冊後可看大圖

Ryan, it is a top force chassis kit.

Lets go~

Please post your top force!

ryan, u should have a top force before ...... that is what u had converted a top force to a touring ...

attached shown the correct plastic parts for top Force.

ok~ will upload.

原帖由 go2usie 於 2008-4-13 23:03 發表

                               
登錄/註冊後可看大圖

ryan, u should have a top force before ...... that is what u had converted a top force to a touring ...

attached shown the correct plastic parts for top Force.

Oh, thanks. At such, the red-crossed battery holders should be the one for TA02/FF01.

explorer 兄, attached pic

我的TOP FORCE 2號機~~

[ 本帖最後由 go2usie 於 2008-4-14 00:47 編輯 ]

原帖由 go2usie 於 2008-4-14 00:43 發表

                               
登錄/註冊後可看大圖

explorer 兄, attached pic

我的TOP FORCE 2號機~~

bro susie,

this red Top Force Evo was bought from yahoo.hk recently ??.......

I need to bid one Top force to race with you bro!!!!