RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 2864|回復: 11
打印 上一主題 下一主題
收起左側

(求助) 無刷 + 鋰電 + charger 入門

[複製鏈接]
跳轉到指定樓層
1#
lam727 發表於 2008-11-6 14:19:04 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
無刷 + 鋰電 + charger

要注意D "mud" ??
Pricing?
Any post of website recommand?
Thanks a lot

[ 本帖最後由 lam727 於 2008-11-6 14:37 編輯 ]
2#
kkchung 發表於 2008-11-7 22:14:31 | 只看該作者

如果平玩無刷可以到廣華街看看好盈無碳套裝。充電器一般用G.T Power A6、Imax也很不錯了。鋰電如果是用於一些田宫特定車種如TL01可選IB的㘣角電池殼那些。主要小心是鋰電不能過充和過度放電,不過新一些無碳電變也可設定鋰電模式不怕過度放電。而無碳馬達最好不要高速空轉,有些馬達高速空轉會容易壞掉磁心。
3#
呀瘋 發表於 2008-11-7 22:31:18 | 只看該作者
玩車同追女仔一樣,
最緊要「膽大心細面皮厚」
有咩唔識就問下模型舖d伙記,
佢地好多都好好人架!
4#
 樓主| lam727 發表於 2008-11-11 11:32:52 | 只看該作者
原帖由 kkchung 於 2008-11-7 22:14 發表

如果平玩無刷可以到廣華街看看好盈無碳套裝。充電器一般用G.T Power A6、Imax也很不錯了。鋰電如果是用於一些田宫特定車種如TL01可選IB的㘣角電池殼那些。主要小心是鋰電不能過充和過度放電,不過新一 ...


1) How much roughly for a basic set?
2) I have got "much more cell master", Is it ok for charging 好盈無碳套裝?
3) I decide to put the system on my TT01, Which Brand/type of batt. should I choose?
4) I am using the gear-ratio 25T/55T in my TT01, will the system burnt?

Thank you very much for helping.
Cheers
5#
hyuen 發表於 2008-11-16 00:04:35 | 只看該作者
原帖由 lam727 於 2008-11-11 11:32 發表


1) How much roughly for a basic set?
2) I have got "much more cell master", Is it ok for charging 好盈無碳套裝?
3) I decide to put the system on my TT01, Which Brand/type of batt. should I choos ...


I want to know the answer too, coz i am also considering shall I change to brushless and use lipo or not...
thx brother
6#
 樓主| lam727 發表於 2008-11-19 12:44:55 | 只看該作者
原帖由 lam727 於 2008-11-11 11:32 發表


1) How much roughly for a basic set?
2) I have got "much more cell master", Is it ok for charging 好盈無碳套裝?
3) I decide to put the system on my TT01, Which Brand/type of batt. should I choos ...


Could anyone help? thanks
7#
hardmankam 發表於 2008-11-19 18:53:42 | 只看該作者
1) How much roughly for a basic set?
--> 好盈無碳套裝 is about $5xx in KWS

2) I have got "much more cell master", Is it ok for charging 好盈無碳套裝?
--> 好盈無碳套裝 is ESC + Motor only. (not battery) For lipo, you will need to buy a charger that is compatible with Lipo batteries.

3) I decide to put the system on my TT01, Which Brand/type of batt. should I choos ...
--> There are many brands of Lipo, like Or?on, Yea? Racing, etc.... it depends on your budget.  $ range from $250 to $600

4) I am using the gear-ratio 25T/55T in my TT01, will the system burnt?
--> It depends on the final ratio of your TT01 and the speed of the motor.  55T/25Tx2.6 = 5.72 ... 13T motors should be ok, but not sure for 9T motors.
8#
zoozoo 發表於 2008-11-19 23:32:47 | 只看該作者
锂电记得唔好充满存放,甘样会好伤电池,严重会大肚,因为我试过
一般玩完放埋一边就算,玩果时再充。如果打算存放几个月就要充到7.6V左右再存放
9#
 樓主| lam727 發表於 2008-11-24 12:40:16 | 只看該作者
Thank you very much

[ 本帖最後由 lam727 於 2008-12-30 14:49 編輯 ]
10#
solid 發表於 2008-11-26 18:07:54 | 只看該作者

回復 7# 的帖子

thank for sharing
11#
 樓主| lam727 發表於 2008-12-23 12:31:45 | 只看該作者
原帖由 hardmankam 於 2008-11-19 18:53 發表
1) How much roughly for a basic set?
--> 好盈無碳套裝 is about $5xx in KWS

2) I have got "much more cell master", Is it ok for charging 好盈無碳套裝?
--> 好盈無碳套裝 is ESC + Motor only. (not ba ...


2) Does "Much More Cell Master" has a function of parallel charge?
3) Would like to get a batt which has high MAh, 可以玩好多次(come用D), and safe(reliable brand, not easy to occur explosion). Any suggestions??
4) 55T/25Tx2.6 = 5.72, why do we need to x2.6?

Thanks a lot
Have a nice day & Happy New Year

[ 本帖最後由 lam727 於 2008-12-30 14:48 編輯 ]
12#
 樓主| lam727 發表於 2008-12-30 14:53:01 | 只看該作者
原帖由 lam727 於 2008-12-23 12:31 發表


2) Does "Much More Cell Master" has a function of parallel charge?
3) Would like to get a batt which has high MAh, 可以玩好多次(come用D), and safe(reliable brand, not easy to occur explosion). An ...



Can Anyone please help? thanks
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-11-17 00:20 , Processed in 0.034102 second(s), 15 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表