lipo問題

我第一次差lipo電，差到二千幾就完咗同嚿電都唔暖，請問如可知道差滿嚿電呢？條線係唔係温度線，點用？請師兄幫手：：唔刻！

叉lipo係唔會暖喎
最多都係叉機熱

叉lipo係唔會暖喎
最多都係叉機熱
move7648 發表於 2009-5-17 23:19

                               
登錄/註冊後可看大圖

thank you

條線係差油車用既火咀電用既

lipo is cool when charge

2000 MAH is normal when the battery charging frist time.

據小弟所知, 呢d差機係咪計 v 數, 唔係計mah數架呢~所以差到二仟幾mah 但夠v數就停.
有錯請指教.

叉 lipo 電應該係夠v數就停

The charger should preset to stop at 8.4V for 2 cell 7.4v lipo battery.

I am using a $480 charger, very popular in KWS

But i am not sure what is the max AMP should i use to charge?

For example, if i charge 3800mAh lipo, should i use 1C, which is don't charge higher than 3.8A?

But i am not sure what is the max AMP should i use to charge?

For example, if i charge 3800mAh lipo, should i use 1C, which is don't charge higher than 3.8A?
hk_sdu 發表於 2009-5-18 12:27

                               
登錄/註冊後可看大圖

exactly

But i am not sure what is the max AMP should i use to charge?

For example, if i charge 3800mAh lipo, should i use 1C, which is don't charge higher than 3.8A?
hk_sdu 發表於 2009-5-18 12:27

                               
登錄/註冊後可看大圖

For Lipo, its at most to charge at 1C.  Lower than 1C is also ok.
eg: 3800 mah  -> charge at a MAX of 3.8A