YR for Tamiya F103 Hop Ups Parts feature & tips

Yeah Racing New & Unique Design Hop Ups Parts

For F1 Formula RC Car!!

                               
登錄/註冊後可看大圖

YR for Tamiya F103 Hop Ups Parts feature & tips

                               
登錄/註冊後可看大圖

The Yeah Racing (#F103RM-006BK) Aluminum Knuckle Arm & Servo Saver Set (1,2,3 deg) (BK) for Tamiya F103RM

1. The camber could be set in 3 different angles (-1°, -2°, -3°) with the installation of the 3 particular camber uprights included in the Yeah Racing Aluminum Knuckle Arm & Servo Saver Set.

Tips

<-1°,-2°&-3° Camber>

Camber affects the car’s traction. Generally more negative (inward) camber means increased grip since the side-traction of the wheel increases.

Adjust front camber so that the front tires wear flat.

2. The length of the Aluminum Front Knuckle Arm is adjustable in order to set up different toe-in and toe-out angles of the wheel.

Tips

Increased (more toe-in)

‧ Increases understeer (decreases oversteer).

‧ Decreases steering at corner entry.

‧ Increases “nervousness.”

‧ Makes car more difficult to drive.

Decreased (more toe-out)

‧ Decreases understeer (increases oversteer).

‧ Increases steering at corner entry.

‧ Increases straight-line stability.

‧ Makes car easier to drive.

3. An extra O-Ring would adjust the chassis in a higher or lower height.

                               
登錄/註冊後可看大圖

*Picture demonstrating the chassis in different height by adjusting the O-ring.

Furthermore, the Yeah Racing Knuckle Arm is made of black aluminum which light weight the chassis. The specific designed servo saver enhances the strength of the chassis. This feature also increases the strength of holding up the saver to provide a more accurate turn angle in cornering. With this stylishly designed Upright Set, the F1 chassis looks more outstanding, compared with other similar products in the market.

Where to buy?

(#F103RM-006BK) Aluminum Knuckle Arm & Servo Saver Set (1,2,3 deg) (BK)

http://www.rcmart.com/catalog/rc ... ?cPath=595_744_1221

News @ http://rss.rcmart.com/2009/03/yeah-racing-f1-alu-knuckle-arm-servo-saver-set-arrival/

Yeah Racing (#F103GT-014) Aluminum Main Drive Shaft (BU) / (SV) For Tamiya F103 / F103GT

                               
登錄/註冊後可看大圖

Yeah Racing (#F103GT-014) Aluminum Main Drive Shaft (BU) / (SV) For Tamiya F103 / F103GT

Feature:

-Strong and light weight Aluminum Main Drive Shaft only 9.8g

-For Tamiya F103 / F103GT

Tips

This shaft can help acceleration and brake easy.

Where to buy??

Yeah Racing Aluminum Main Drive Shaft (BU) / (SV) For Tamiya F103 / F103GT

http://www.rcmart.com/catalog/ad ... words=%23F103GT-014

News @ http://rss.rcmart.com/2008/11/yeah-racing-optional-parts-tamiya/

                               
登錄/註冊後可看大圖

Aluminum Motor Mount

                               
登錄/註冊後可看大圖

Aluminum Motor Mount feature:

- Single Piece Motor Mount

- Fit Yeah Racing (#YA-0180) Tornado Cooling Fan X2

- Rear Wing adjustable

- Super strong and light weight

- Improved weight balance

- Increasing cooling efficiency

Fit Tamiya F103RM and F103GT

Tips

-Adjustable rear wing can more or less traction to gain the better set up.

-Don’t use too long of the screw to fix motor.It will cause the motor DAMAGE.

Where to buy ?

Yeah Racing Aluminum Motor Mount Single Piece For Tamiya F103RM

http://www.rcmart.com/catalog/rc ... ?cPath=595_744_1221

Where to buy ?

Yeah Racing (#YA-0180) Tornado High Speed Cooling Fan for Motor Heat Sink (30×30×10mm)

http://www.rcmart.com/catalog/rc ... ya0180-p-27394.html

News @ http://rss.rcmart.com/2009/04/ye ... -arrival/#more-3659

The Yeah Racing (#F103RM-021BK) Aluminum Ball Battery Mount

                               
登錄/註冊後可看大圖

The Yeah Racing (#F103RM-021BK) Aluminum Ball Battery Mount is made of a single piece aluminum. The single piece design could efficiently increases the strength of the F1 chassis but light in weight. The pivot ball is the key feature of the battery mount which allow the T-plate to tweak smoothly in order to gain a better handling and grip. For advance setting, there are 2 tweak screws on the battery mount for chassis balancing adjustment. This battery mount is prefect fit for the square / round hard case Li-Po battery or normal stick pack.

The Yeah Racing (#F103RM-021BK) Aluminum Ball Battery Mount is suitable for Tamiya F103 RM / F103GT / F103 (15th Anniversary)

Aluminum Ball Battery mount feature :

-Super strong and light weight

-Have 2 set of screw can adjust the car balance

-Fit for LiPo (with case) & Stick Pack batteries

-Blue thread lock to fix the set screw

-Increases overall grip

Tips

-Add GREASE when rebuild the ball

                               
登錄/註冊後可看大圖

-Less tight the front set screw when bump track

  (Standard length *2.6mm of the set screw head)

                               
登錄/註冊後可看大圖

-Need to ‘TIGHT’ all the screw before use

                               
登錄/註冊後可看大圖

-Use “Blu-tack” to fix the set screw

Where to buy ?

YR aluminum ball battery mount set

http://www.rcmart.com/catalog/rc ... a-f103-p-28607.html

News @ http://rss.rcmart.com/2009/04/ye ... m-f103gt/#more-3771

Yeah Racing (F103RM-135BK)  Aluminum + 2mm FRP Suspension Set (BK)

                               
登錄/註冊後可看大圖

Yeah Racing (F103RM-135BK)

Aluminum + 2mm FRP Suspension Set (BK)

For the TamiyaF103 chassis have released another rear end suspension solution following up from their floating solution released last month. The new 2mm FRP Suspension set works with the F103RM and adds a very precise pivoting connection between the t-bar and single piece rear motor mount. The system is connected by bearings so the up and down action is now very precise and doesn’t effect the twist of the t-bar.  

Description:

This is the Aluminum + 2mm FRP Suspension Set (BK) for Tamiya F103RM

Feature:

For: Tamiya F103RM, F103 15th Anniversary

Material: Aluminum (Motor Mount), FRP (T-Bar)

Color: Black

Specification:

FRP Thickness: 2mm

Tips:

-We can keep 2mm T-bar for spare.

http://www.rcmart.com/catalog/rc ... tamiya-p-28805.html

-If you still need more rear traction ! You can try to use 1.6mm T-bar.

http://www.rcmart.com/catalog/rc ... rm013b-p-28804.html

Include:

Motor Mount (1 Pc)

T-Bar (1 Pc)

T-Bar Mount (1 Pc)

45mm Shaft (1 Pc)

5×8mm Bearing (2 Pcs)

4mm Grub Screw (1 Pc)

3mm Washer (2 Pcs)

7mm Washer (2 Pcs)

16mm Round Hex Screw (2 Pcs)

12mm Round Hex Screw (2 Pcs)

6mm Round Hex Screw (2 Pcs)

4mm Flat Hex Screw (4 Pcs)

Where to buy ?

http://www.rcmart.com/catalog/rc ... ension-p-28688.html

News @ http://rss.rcmart.com/2009/05/yr ... f103rm-new-arrival/

Yeah Racing (#F103RM-020BK)

Aluminum Damper Set (BK) for Tamiya F103 Series / F104 Pro

                               
登錄/註冊後可看大圖

Yeah Racing (#F103RM-020BK)

Aluminum Damper Set (BK) for Tamiya F103 Series / F104 Pro
Description:
# This is the Yeah Racing (#F103RM-020BK) Aluminum Damper Set (BK) for Tamiya F103RM/F103GT/F103 15th Anniversary/F104 Pro.
Feature:
# For: Tamiya F103RM/F103GT/F103 15th Anniversary/F104 Pro
# Material: Aluminum
# Color: Black

Tips:-The Yeah Racing Damper Set contains 2 dampers. The remain damper for spare use or use different damper oil to let more short time to get the better set- up.


Include:
# Damper (2 Pcs)
# Soft Spring (Black) (2 Pcs)
# Hard Spring (Blue) (2 Pcs)
# Medium Spring (Silver) (2 Pcs)
# Pillow Ball (2 Pcs)
# Ball Nut (2 Pcs)
# 3 x 16mm Flat Hex Screw (2 Pcs)
# 3 x 16mm Round Hex Screw (2 Pcs)
# 3 x 9mm Flat Hex Screw (2 Pcs)
# Pistons in 1-Hole (2 Pcs)
# Pistons in 3-Hole (2 Pcs)

*Please click the image below to download the F103RM-020BK Manual

                               
登錄/註冊後可看大圖

Where to buy ?

Yeah Racing (#F103RM-020BK)

Aluminum Damper Set (BK) for Tamiya F103 Series / F104 Pro

http://www.rcmart.com/catalog/rc ... ?cPath=595_744_1221

Source : Yeah Racing