Ms Betty is ready!

She is a RF under the Betty shell ...

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

now ....... when will be the next crawler party? ....  

一架呢種車大約要幾錢阿?

請問個dig係邊道買嫁？

wow is this the Losi crawler?

It should be Kyosho Rock Force. The DIG system is an optional item and can be bought from Hung * at KWS.

Yes. It is Kyosho RockForce.

I already install the HS worm gears, the Dig system with the XTreme Racing Chassis. All the Blue parts are Hot Racing parts.

The wheel base was extended to 12.5" by using the rear upper links as the rear lower links, then the rear upper links were replaced by the Traxxas part#5138 - 108mm Front Turnbuckles of T-Maxx.

Also the original front 3 links were changed to 4 link suspension by using the other rear upper link mount with the original rear lower links that were removed from the extended wheelbase. Before install the upper links, I have to turn around the axle together with turn around the worm gear top piece and the turn Knuckles, too.

Last thing is the spur + pinion set were changed to 32 pitch set as the outrunner BL motor is 5mm size shaft that easily find the 5 mm 32 pitch pinion. The maximum size of the spur can be fitted into the chassis is 60 tooth 32 pitch spur.

That's about it.  

纤维侧板真不错!!!!靓!!!!!!!!!我也有一台,AX10的壳好看!!
看看我的车...........http://bbs.rcfans.com/viewthread ... &extra=page%3D4

Why do you choose the outrunner  BL motor? Thx!

Why do you choose the outrunner  BL motor? Thx!
bd410 發表於 2009-7-6 21:23

                               
登錄/註冊後可看大圖

I do really need all the extra torque of the outrunner BL motor to drive this heavy car.

The other thing is I already put the High Speed worm gears in, so the low KV of the outrunner BL motor is acceptable.