RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 4436|回復: 14
收起左側

問Servo問題:9602VS9650

[複製鏈接]
Waijeff 發表於 2010-9-3 18:29:19 | 顯示全部樓層 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
其実有無分別?
alex1030 發表於 2013-5-3 10:43:41 | 顯示全部樓層
Finally, my kyosho bike is all setup. I m now using Hitec HS - 85MG and it fits very well !!!
alex1030 發表於 2013-4-27 22:39:10 | 顯示全部樓層
ballhk58 發表於 2013-4-26 17:20:49 | 顯示全部樓層
本帖最後由 ballhk58 於 2013-4-26 19:52 編輯

                        
ballhk58 發表於 2013-4-26 17:11:21 | 顯示全部樓層
其實架dee想好走係有好多野要diy
alex1030 發表於 2013-4-26 08:49:03 | 顯示全部樓層
Thank you C hing, is there any tips for making the Kyosho bike to turn better? Any hop up parts will help it to turn sharper?

Because , when I got the second hand bike, it does not want to turn at all, I suspect it is the problem of the servo, but I yet to buy the right servo yet, therefore I cannot try.

Bascially, do u mean the original setup of the bike should be good at turning?

ballhk58 發表於 2013-4-25 23:07:42 來自手機 | 顯示全部樓層
話邊架好呀??我都係只玩京商dee,但亦識車會會員用ZH,但佢要攪左好耐先好走,京商係灣係會比較靈活
alex1030 發表於 2013-4-25 07:21:37 | 顯示全部樓層
ballhk58 發表於 2013-4-24 17:57
兩架都有人玩但要睇場地,因兩架係轉向方面係兩個唔同既設計

Oh really? Which one has a better turning? Or which one is better for fast track?
ballhk58 發表於 2013-4-24 17:57:59 來自手機 | 顯示全部樓層
兩架都有人玩但要睇場地,因兩架係轉向方面係兩個唔同既設計
alex1030 發表於 2013-4-24 14:26:39 | 顯示全部樓層
Oh...I live in Sydney. I would love to Rc with you guys one day. I guess I may need to bring it to HK next time. Thank you so much for your reply.

And may I ask one more thing, If i want a modern 1/8 bike, is the ZH 203 the best ?
ballhk58 發表於 2013-4-24 12:46:07 | 顯示全部樓層
alex1030 發表於 2013-4-24 11:19
Hello C hing, I bought a second hand Dee bike here and I am rebuilding it. The original servo is dea ...

師兄......就算你買左futaba 9650 個servo位都係唔啱裝,因京商dee既車架已經係廿年前既出品,所以裝servo既方置係要適當既改動先裝得正確,有時間就留意下我地約放車既活動,拎架車同工具出黎交流下,你就會知點整
alex1030 發表於 2013-4-24 11:19:47 | 顯示全部樓層
Hello C hing, I bought a second hand Dee bike here and I am rebuilding it. The original servo is dead , is 9650 the servo I needed? Because I bought two mini servo online and the bike's original servo horn cannot fit into the servo.

Therefore, I want to confirm that 9650 is good for the Kyosho dee bike.

Thank you very very much for your answer!!!
葉生 發表於 2010-9-3 20:32:54 | 顯示全部樓層
冇問題...行到....
 樓主| Waijeff 發表於 2010-9-3 20:26:59 | 顯示全部樓層
最後一問:9650可行Kyosyou的10年前1:8的NSR 500???

感謝。
beebee 發表於 2010-9-3 19:47:50 | 顯示全部樓層
扭力同速度數據上2者已經有分別.....仲有9602係行金屬齒....而9650係行膠齒......我自己兩者選擇會係9650......道力會柔順好多o架
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-12-7 11:08 , Processed in 0.038751 second(s), 16 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表