T3 battery tray from Atomic

Any T2 / T3 c hing uses this?  Thanks!

師兄呢舊野都幾肉吓喎～～不過用呢舊野會頂二樓板或者要舊電坐出ｄ先可以用到！

肉 ah?  It said, by adjusting the in&out position to balance the weight, then no need to add weight.

呢舊野麻麻地, 正如威威CHING講,用o係T2/T3一定要坐出, 我覺得穿膠紙位要換膠紙時好唔方便

c hing, I am new hand, use velcro instead of tape

thinking to try this out.

c hing, I am new hand, use velcro instead of tape

thinking to try this out.
GigaRacer 發表於 2010-10-7 12:08

                               
登錄/註冊後可看大圖

    That way the battery cannot be held firmly by velcro

ｘｒａｙ有舊電池頂夾，係用擰既，唔洗用膠兜就唔洗高左要坐出舊電啦！

我用緊. 覺得好方便及對lipo保護性好好. 因為係用兩條摩術貼, 兩貼ok. 另外那tray的高度係唔會頂二樓板. 若用一般厚lipo 唔使坐出. 當用較厚lipo, 就可以好方便咁坐出免頂二樓板,尤其我0的lipo電唔同厚度,所以好適合. 而坐出for 車架平衡都有幫助.所以我會keep住較出小小. 不過個tray本身有厚度. 舊電CG會高左

至於肉..ha. 個車殼lup住唔係好介意. 個人覺得最緊要方便.

c hing, good info.  could you share some pictures of your car?

How much ... ?

c hing, good info.  could you share some pictures of your car?
GigaRacer 發表於 2010-10-7 13:58

                               
登錄/註冊後可看大圖

得張好細. ...haha.  ,要型就更係貼膠紙la.

登錄/註冊後可看大圖

How much ... ?
rcpop 發表於 2010-10-7 14:03

                               
登錄/註冊後可看大圖

for your reference only.
http://www.rcmart.com/catalog/rc ... epo001-p-28234.html

t3 no need

Got it.... hahaha.  Not very pro, but looks fine.  Will try to see if the battery will fly out of the car.  

其實用唔用佢.......排電都應該飛唔到出黎........