MR-02 Bearings 裝係咩位置

Hi all,

How many bearings are there in a set? I got 7 on my set, I have placed it on every where it should go, one wheel is missing one of the bearing? have I put bearing in a place that I shouldn't have? or there is 1 bearing missing?? Thank you for answering

7 is right

4 smallest for front wheel , 2 athe the motor mount, and 1 for the rear wheel (gear side only ! )

There should be one side that is on the rear axle that does not need bearing.  Tell you the truth I don't remember which side but either one of the rear wheels does not need bearing.  Roll it and check it yourself.  7 pcs is correct like Evo5 says...

WOW, this place is great, I have only post this question a short while, all you guys are so willing and helpful! Thank you!! While I am here, if you guys have a Mr-02, what would you get for tuning? Sorry for asking such lame question, but I am still new to it. Thank you!

原帖由 username 於 2006-8-15 04:15 PM 發表
WOW, this place is great, I have only post this question a short while, all you guys are so willing and helpful! Thank you!! While I am here, if you guys have a Mr-02, what would you get for tuning ...

first of all, the motor mount is a must to replace, there are quite a few brand make good motor mount, ie. ATM or 3 racing, then is the graphite T-plate, although is an I shape, but we still called it T-Plate, This item I would suggest to buy the kyosho one, dimensions are much precise

actually there are many to change kekeke,
the front turning block, King pin, Char Char, oh Ball diff etc
take a look at this page just to give u an idea of what is it !
http://www.3racing.com.hk/x_prod ... ni-Z%20MR-02%20(MM)

[ 本帖最後由 Evo5 於 2006-8-15 16:27 編輯 ]

So I guess by changing motor mount, I would need to change Motor too, I have the FET version MR02 (just the chassie one). Speed is not the main thing, I prefer to have a user friendly (easy to handle) car. Do I need to change the ball diff for extra smoothness? thank you

I see...I guess I am going to get poisoned sooner or later with all these modifications lol!! thank you!

It has to be modifly to have good handling !

I suggest to use a Ferreri ENZO cover for the easiest handling...  It has a slight "understeer" which makes cornering much easier.  The NSX cover is also good but it corners "too fast" in my taste...  takes some practice to handle it well...

i'll recoment fairlady500 too, it look nice and well proformance on track.

hahaha okok...I shall go down KWS have a look, do you guys have MR-02?

原帖由 username 於 2006-8-15 16:46 發表
hahaha okok...I shall go down KWS have a look, do you guys have MR-02?

I M PLAYING MR02 ENZO SHELL

原帖由 david6680 於 2006-8-15 16:47 發表


I M PLAYING MR02 ENZO SHELL

OOO, you got any photos? and set up informations? I remember you were very helpful on my other thread!! Thank you!

If u setup the car in the right direction, then most shells are just ok to be race......
Saw a guy with a beetle shell the other day , the handling is sooooooo good !

原帖由 username 於 2006-8-15 16:49 發表



OOO, you got any photos? and set up informations? I remember you were very helpful on my other thread!! Thank you!

我部車原裝ad 車，所以係ad pcb。
改裝有：
1. bearing
2. 京商kingpin
3. atm 金屬轉向杯
4. atm cha cha
5. atm ad motor
6. atm 珠叉 (不過珠叉京商好d)
7. atm 98mm motor 架
8. H 板
9. TIRE頭20 尾10 (FOR 14/F PLAY)

當然，仲有控，電，CHARGER個D野啦

原帖由 Evo5 於 2006-8-15 17:02 發表
If u setup the car in the right direction, then most shells are just ok to be race......
Saw a guy with a beetle shell the other day , the handling is sooooooo good !

beetle shell係PLAY AWD？？

Beetle? wow, I guess its just practice, practice and more practice and find the right tuning for myself, what do you mean by Ad car? and Ad motor? and Cha Cha?? thank you!

原帖由 username 於 2006-8-15 17:07 發表
Beetle? wow, I guess its just practice, practice and more practice and find the right tuning for myself, what do you mean by Ad car? and Ad motor? and Cha Cha?? thank you!

AD CAR (COPY FROM MMS)

AD 電子版, 次世代miniz 底版,
數碼servo, 行fm 25mhz,
本身有兩對3010 fet, 已可配合市面上任何摩打,
輸出power 大過舊am 版.
轉向, 油門 動作比以前細緻, 線性
再可配合 電腦專用軟件, 改變 servo, 油門setting  
油門 輸出頻率, 可作三段調整,
高頻: 慳電, 高轉
低頻: 大力, 但耗電
各方面都比舊am版 優勝.
但只可配合ex10, 或ex1 mars 使用
所以你見車場, 咁多人用ex10

AD MOTOR (AD Stock Motor)
http://www.rcatomic.com/main/modules/tinycontent/index.php?id=24

CHA CHA

                               
登錄/註冊後可看大圖