Sakura S - Diff gear damage

Hi Chings

I have killed 2 diff in one week, the back and then front.  (First diff gear from kit), is there anyway to make them last longer, such as adding shims in certain area in the diff?

I run a 2400VK motor with turbo mode.

Many thanks in advance.

Cheers

Change them to metal gear. Only $160 for both.

So Good, which shop and what brand? many thanks!

回復 3# bigheman
金屬差速齒, $80 蚊包,  go to the shop call 好景.
The metal gear, original use for the NT-1.

So Good, which shop and what brand? many thanks!
bigheman 發表於 2011-2-4 20:39

                               
登錄/註冊後可看大圖

車中樂、萬里..等等 KM Group HK-1 用金屬差速齒。約六十多元左右。

Thanks so much for the advise!! :-)

回復  bigheman
金屬差速齒, $80 蚊包,  go to the shop call 好景.
The metal gear, original use for ...
b.woo 發表於 2011-2-4 21:12

                               
登錄/註冊後可看大圖

Ha~.~ I bought 1 set at Hung X cost HKD12X for NT-1

I am not suprise.......KWS sea food price ma

Got it today, but after install, (and try many times), still find it is very tight, not so smooth, any tips to make it smooth?

Many thanks

Leo

oh i find out that if you use HK1 metal diff gear, you need one 1 shim each side inside the diff, now is all smooth!!

As the thickness of the gears are different!