剛買3pk有小小問題請教

小弟買左支3pk回家,林住換上架 tto1,典知冇反應.
D servo.線又check過.冇問題.電變係星星跟tt01個個
..用電架都冇反應..
請指教~~

原帖由 macz_chung 於 6/9/2006 01:07 AM 發表
小弟買左支3pk回家,林住換上架 tto1,典知冇反應.
D servo.線又check過.冇問題.電變係星星跟tt01個個
..用電架都冇反應..
請指教~~

點樣冇反應!?架車有冇發癲!?

servo直頭唔郁~

原帖由 macz_chung 於 6/9/2006 01:30 AM 發表
servo直頭唔郁~

電變有冇著???有冇嘟嘟嘟咁???

原帖由 ALEXANDER 於 2006-9-6 01:32 發表

電變有冇著???有冇嘟嘟嘟咁???

有ar

I think is the mode, ppm or pcm not yet set.  The factory may set as HRS.  
If you use FM or AM reciever, you need to set to ppm.

原帖由 gibson 於 2006-9-6 01:48 發表
I think is the mode, ppm or pcm not yet set.  The factory may set as HRS.  
If you use FM or AM reciever, you need to set to ppm.

Thank you for your help~
How can i set the pcm?
Yes i use the Fm reciever~

原帖由 gibson 於 2006-9-6 01:48 發表
I think is the mode, ppm or pcm not yet set.  The factory may set as HRS.  
If you use FM or AM reciever, you need to set to ppm.

Thank you for your help~
How can i set the pcm?
Yes i use the Fm reciever~

Go to manual and select the p-mod
move the square to ppm, than hold the + and - together for two second, the last line will show like this

Now operating :  ppm

ppm = fm and am if you using am module....  hope it could help you!!

HRS
PPm
PCM
其實有分別ar?

Those are different kinds of format of wave.  HRS only for HRS receiver- high respones.  PCM=only for pcm receiver.   PPM = fm, this mode also for am if using am module....  hope this can help....

原帖由 gibson 於 2006-9-6 11:29 發表
Those are different kinds of format of wave.  HRS only for HRS receiver- high respones.  PCM=only for pcm receiver.   PPM = fm, this mode also for am if using am module....  hope this can help....

都唔得.....

原帖由 gibson 於 2006-9-6 11:29 發表
Those are different kinds of format of wave.  HRS only for HRS receiver- high respones.  PCM=only for pcm receiver.   PPM = fm, this mode also for am if using am module....  hope this can help....

都唔得.....

what type ur reciever, what model,brand fm/am????? and ur 3pk is new 3pks or 2nd hand 3pk???

原帖由 macz_chung 於 2006-9-7 01:17 發表

都唔得.....

after u press + and - button, u can see memory= ? then turn off power, and then turn on.......is it ok ?

原帖由 Edde 於 2006-9-7 01:46 發表


after u press + and - button, u can see memory= ? then turn off power, and then turn on.......is it ok ?

Thanks bro edde, I miss this step, after the adjustment, you need to turn it off and turn on again,

The power in a group always better than along!!!

原帖由 gibson 於 2006-9-7 03:02 發表


Thanks bro edde, I miss this step, after the adjustment, you need to turn it off and turn on again,

The power in a group always better than along!!!

I also forget the before step ga, Bro gibson.