T4 斷脛

又係玩得激得济, 玩到 T4 斷脛, 要去 Losi Part House 訂個新炭兜, 原来個兜條脛係最弱的一环 !
另, 自從換左新萬向之後, 发現左右車呔磨損唔平均点解有冇師兄可以指點一吓.

登錄/註冊後可看大圖

C-hing, graphic bottom tray break easier than cheap plastic....please consider that.

Thanks advise, is it cus carbon basetray too hard and more easy to break in the thin area ?
Should I buy the normal plastic tray better ???  

how many trun motor use??

If you are not hard racing, plastic tray will last longer. You may want to check the shock setting, it seems to me that your front left shock is stuffer than the right.

gimsink 發表於 2011-8-21 20:08

                               
登錄/註冊後可看大圖

Thanks advise, is it cus carbon basetray too hard and more easy to break in the thin area ?
Should  ...

我又覺得未必駛，始終架車走姿會有少少出入

反正換兜差不多等於rebuild一次，set下架車仲好啦

至於左右呔蝕唔同，你即管check下兩條萬向啦，不過我估未必關事

我見你用的呔，估你都係飛街，可能係右彎多過左彎，都會咁 （跑JV都會，因為JV右彎高速D....)
PS. T4真係好好玩!我果架玩左好多年，都仲係好好!

師兄, 對萬向差速去骨節果段是新換的, 但找不到不平均的原因, 我飛街所以冇分左定右总之亂飛, 之前之所以斷狗骨頭可能因為差速杯係 factory team 偷輕版, 跑得粗杯蝕得多成個狗頭闸咁, 張支狗骨頭批断左, 所以專登訂普通版差速杯, 厚 D 重 D 不過好似耐操 D, 亜蘇士真係好玩由 RC10T 玩到 T4, 不知幾多年了...

mlee 發表於 2011-8-21 20:54

                               
登錄/註冊後可看大圖

If you are not hard racing, plastic tray will last longer. You may want to check the shock setting,  ...

Front shock should be OK, because the baseplate break neck, it push the head assembly to right side, so the photo showed unbalance shock, I had unscrewed the topplate so Ok now, will rebuild the suspension anyway, thanks advise.     

Motor 13.5T,  gear 78/25T

gimsink 發表於 2011-8-21 22:53

                               
登錄/註冊後可看大圖

師兄, 對萬向差速去骨節果段是新換的, 但找不到不平均的原因, 我飛街所以冇分左定右总之亂飛, 之前之 ...

呢架車都係用D耐用parts好，因為真係玩到好多年，唔係鬥車又唔駛成日整

左右呔問題，我再諗到就可能係架車左右重量不平行或者大細彎啦，唔知呢？未研究到就唯有勸力D調下呔啦

C-Hing, 飛街的話，頭呔有D厚!  太食力啦。我飛街用B4呔好D,車車太食力時起頭。。只是我的玩法

回復 gimsink 的帖子

題外話, 排骷髗電精唔精神?

精神 !

貪平, 去 BoyZ 買個膠兜, 運費只要三美元 ! 可惜 BoyZ冇炭兜. Losi Parts House 有炭兜不過要八美元運費 ! 通漲迫人, 冇計, 平平地用住先, 等建行上番六蚊先豪個炭兜反泥 !

A Main 有炭兜