HONG NOR X1CRT 個轉向用9451夠五夠力?有咩好介紹?我個系pcm接收

HONG NOR X1CRT 個轉向用9451夠五夠力?有咩好介紹?

用13kg的吧，9451可能不够力

9451吳夠力
如果high torq.的servo吳好買Futuba 啦！
Futuba 去到12/3kg的5351要成八百元
不如買Sanwa VX or KO2344果D有13kg
再吳係Hi-tec 的5995TG有25kg都只係$700左右。
不過5995係間吳中至有貨返

原帖由 101路霸 於 2006-9-21 14:55 發表

25kg 拉力可以掉住個一兩歲小朋友, 勁呀!

師兄，你係AYK年代
"101路霸"係AYK 90's頭的 RoadRunner 101的1:12 車名來bor

原帖由 FatDoy 於 2006-9-21 13:21 發表
HONG NOR X1CRT 個轉向用9451夠五夠力?有咩好介紹?

13Kgs for Truggy Steering is must !!

but some of us in FSY using Hitec 23Kgs Servo for Steering , 13kgs for throttle.

I got a question about the servo saver on Truggy, is it suitable to close the servo saver when I'm using 5995TG for steering servo?
I have tried to close it and it got much faster steering reaction, but I'm concerning is it safety for my servo...
Thanks!

原帖由 FatDoy 於 2006-9-21 13:21 發表
HONG NOR X1CRT 個轉向用9451夠五夠力?有咩好介紹?

5998 or 5955

原帖由 SunLi 於 2006-9-21 15:42 發表
I got a question about the servo saver on Truggy, is it suitable to close the servo saver when I'm using 5995TG for steering servo?
I have tried to close it and it got much faster steering reactio ...

The 5995 is a robotic servo which = not good for steering. You will need the 5955 bro.

原帖由 WTO 於 2006-9-21 17:05 發表

The 5995 is a robotic servo which = not good for steering. You will need the 5955 bro.

Yup, you're right. It should be MS5955TG...typing mistake!

So, can I close the servo safer or not? Thanks!

原帖由 SunLi 於 2006-9-21 17:11 發表
So, can I close the servo safer or not? Thanks!

means ?

原帖由 WTO 於 2006-9-21 17:25 發表


means ?

#7

I mean, can I lock the servo saver when I use the 24kg steering servo?
cheers!

原帖由 SunLi 於 2006-9-21 18:07 發表


#7

I mean, can I lock the servo saver when I use the 24kg steering servo?
cheers!

I think dont lock too much when use al. servo horn bro.

otherwise
http://s8.photobucket.com/albums ... rent=ServoSaver.flv

[ 本帖最後由 WTO 於 2006-9-21 18:15 編輯 ]