油壓一問

油壓拆出困難，正常係點樣加油架 ?

回復 man_eddie 的帖子

Which brand?

TT01 + 3 racing, thanks ching

3 racing 油壓

man_eddie 發表於 2011-10-1 19:26

                               
登錄/註冊後可看大圖

油壓拆出困難，正常係點樣加油架 ?

我都用緊3Racing呀師兄 ^^ 唔知邊個位拆出困難?

正常要開蓋加，但上下已被波頭lock緊左，除飛先鬆開，好緊喎 !

man_eddie 發表於 2011-10-1 21:30

                               
登錄/註冊後可看大圖

正常要開蓋加，但上下已被波頭lock緊左，除飛先鬆開，好緊喎 !

I usually loosen the ball end by wrapping the shock shaft with a thick wad of tissue then grip it with a small plier(a combination plier or needle plier will do). You must be very CAREFUL not to pit the shaft though. Now twist the ball end off. Or by using a cutting plier, I grip the shaft right next to the ball end and twist it off. Again, don't be too enthusiastic with pressure.

小弟用trf的 3ra.... 沒用過 ! sorry 幫不上忙

man_eddie 發表於 2011-10-1 21:30

                               
登錄/註冊後可看大圖

正常要開蓋加，但上下已被波頭lock緊左，除飛先鬆開，好緊喎 !

一定要拆出黎先得架喎應該...唔係好明咩上下已被波頭lock緊左 -__- sor

i try again with higher force, thank all ching !l