RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Big wig wheels restore process [打印本頁]

作者: samchung90 時間: 2011-10-18 03:10
標題: Big wig wheels restore process
Big wig wheels restore process.. enjoy!!

作者: tiger1 時間: 2011-10-18 06:31
nice work

作者: tiger1 時間: 2011-10-18 06:31
the words are painted in permanent markers??

作者: speedo 時間: 2011-10-18 10:58
excellent work. pls tell how to restore the broken rim shown in your pic ? thks.

作者: hihizaza 時間: 2011-10-18 11:46
返新得好鬼靚！一流手工

作者: samchung90 時間: 2011-10-18 12:11
回復 speedo 的帖子

in fact, i don't know how to fix scratches on the wheel.. there are still scratches. But, if you clean it thoroughly, the scratches will be less obvious to see.

作者: alanwhc 時間: 2011-10-18 12:22
本帖最後由 alanwhc 於 2011-10-18 12:22 編輯

好有心機!

作者: nastyboy 時間: 2011-10-18 12:31
番新得好靚呀.....

作者: samchung90 時間: 2011-10-18 14:26
本帖最後由 samchung90 於 2011-10-18 14:27 編輯

回復 tiger1 的帖子

it was actually be normal model marker..$20
Thanks for all of your comments!!!

作者: minimini 時間: 2011-10-18 14:39
what cleansing agent did you use ??

作者: @kin888289 時間: 2011-10-18 23:25
勁靚到新一樣.

作者: samchung90 時間: 2011-10-19 01:08
回復 minimini 的帖子

actually, soap or 萬潔零will do the job... please make sure not to use 萬潔零 for those silver or gold rim.. the painted color will come off...

作者: FAZZ 時間: 2011-10-19 01:20
Also do not use 藍威寶. I did it before to my Optima silver rim

作者: samchung90 時間: 2011-10-19 01:23
yeah... chemical only can be used on solid color wheel...i mean, only use those chemical cleaner if the color on the wheel is not printed on.

作者: minimini 時間: 2011-10-19 01:27

samchung90 發表於 2011-10-19 01:08

登錄/註冊後可看大圖

回復 minimini 的帖子

actually, soap or 萬潔零will do the job... please make sure not to use 萬潔零 ...

need to immerse them in soap water or 萬潔零 overnight ??

作者: samchung90 時間: 2011-10-19 01:30
depends how dirty... i don't recommend 萬潔零 overnight, it may erode the plastic..... soap should be alright for overnight... in fact, if you use toothbrush with 萬潔零 , for 2 or 3 minutes, .. 99% of oil and dirty will come off. no need to wait over night...

作者: tiger1 時間: 2011-10-19 09:06
藍威寶 is full of abrasives, bad for anodized parts but is OK for full plastic wheels like bigwig

作者: tiger1 時間: 2011-10-19 09:07
I think 萬潔零 has NaOH (gor see dick) in it, I would only use it for a very short time using gloves.

作者: Hotdog2 時間: 2011-10-19 21:04
你點番新?

作者: toysman2002hk 時間: 2011-10-20 01:30
Thank You !

作者: samchung90 時間: 2011-10-20 01:31
回復 Hotdog2 的帖子

actually, nothing special.. just take off the tires, use toothbrush and 萬潔零 to clean the tires and wheels, use cutter to carefully cut off excess damage around the edge of the rim, clean with water afterward .. then, finally use normal oil base marker to paint the words "MOON CRAFT"... then put them back together and finally wipe some shiny stuff on the tires... then done!! shiny!!

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)