RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 6872|回復: 46
打印 上一主題 下一主題
收起左側

我的第一部油雞. dnx408 (終於完成.)

  [複製鏈接]
跳轉到指定樓層
1#
ringlecheng 發表於 2012-3-12 11:17:15 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
本帖最後由 ringlecheng 於 2012-4-25 15:00 編輯

JOHO 兄, 如果有經過此帖, 想請教你一些問題.


2#
coolcooleric 發表於 2012-3-12 12:34:30 | 只看該作者
磨下膠介字, 不過如果都係不順暢, 就鑽下個膠臂.
我在dnx 同dex都有甘既情況

有錯請指點
3#
 樓主| ringlecheng 發表於 2012-3-12 12:42:09 | 只看該作者
THX CHING, 今晚番去鋤下佢先. 另外想問, 通臂個支野 , 有無個size 可以分享下.
4#
euro614 發表於 2012-3-12 13:18:04 | 只看該作者
5#
 樓主| ringlecheng 發表於 2012-3-12 13:59:07 | 只看該作者
THX CHING, 係邊買, 係五金鋪定要落 KWS?
6#
joho 發表於 2012-3-14 13:46:01 | 只看該作者
Ringle brother, I will say not to worry too much. As long as the friction are not so strong, that you have to use some force to move the arms, it's ok to have a little "sticking" feel. Since when you actually run it for a few minutes, it will go away.

One thing I will like to stress, specially for off-road. Due to the condition this car were design to race on, some of the brands tend to have a slightly tighter tolerance when they are new, so the car will "loosen up" after a few tanks of fuel which is normal. If a car were perfectly loose in the beginning, then it will be very loose after only a few tanks. I hope this make sense.
7#
 樓主| ringlecheng 發表於 2012-3-14 15:44:40 | 只看該作者
回復 joho 的帖子

THX CHING 提點. !!!
8#
 樓主| ringlecheng 發表於 2012-4-3 18:01:21 | 只看該作者
本帖最後由 ringlecheng 於 2012-4-3 18:04 編輯

終於有時間繼續砌落去.....

9#
raman9551 發表於 2012-4-3 18:08:52 | 只看該作者
回復 ringlecheng 的帖子

電髮電得好靚喎
10#
tiger1 發表於 2012-4-3 18:15:25 | 只看該作者
This oil chicken is really fantastic!
11#
tiger1 發表於 2012-4-3 18:16:24 | 只看該作者
真係樣靚身材好,令我好有性趣
12#
tiger1 發表於 2012-4-3 18:18:29 | 只看該作者
中差速玉照下面寫住「月付7000」,真貴
13#
fr888 發表於 2012-4-3 18:30:40 | 只看該作者
I tested run this car a few days ago @ mxclub, really nice, just a few experince to share

1. Set brake epa carefully, i fried my 24kg servo.......
2. I use 5k/5k/1k for diff, seems quite ok for mx
3. I use 35 shock oil for both f and r, i guess maybe can go up to 50 since the stock springs are quite hard
4. Better buy v2 fuel tank or DIY fuel spash guard to protect accident fuel over steering servo
5. Front bumper breaks easily, maybe can buy de racing or v2
14#
 樓主| ringlecheng 發表於 2012-4-3 18:30:56 | 只看該作者
回復 tiger1 的帖子

今晚等我換張 "風月版" 黎整先
15#
fr888 發表於 2012-4-3 18:31:02 | 只看該作者
I tested run this car a few days ago @ mxclub, really nice, just a few experince to share

1. Set brake epa carefully, i fried my 24kg servo.......
2. I use 5k/5k/1k for diff, seems quite ok for mx
3. I use 35 shock oil for both f and r, i guess maybe can go up to 50 since the stock springs are quite hard
4. Better buy v2 fuel tank or DIY fuel spash guard to protect accident fuel over steering servo
5. Front bumper breaks easily, maybe can buy de racing or v2
16#
 樓主| ringlecheng 發表於 2012-4-3 18:44:34 | 只看該作者
回復 fr888 的帖子

I tested run this car a few days ago @ mxclub, really nice, just a few experince to share

1. Set brake epa carefully, i fried my 24kg servo....... << 因為epa 太大??
2. I use 5k/5k/1k for diff, seems quite ok for mx << 係咪即係原裝油. ?? (我只用跟車個支, 好似話計番都係咁上下; 頭/中/尾 a.e - 4500/4500/1500)
3. I use 35 shock oil for both f and r, i guess maybe can go up to 50 since the stock springs are quite hard << 都係用原裝. 話計番都係 a.e - 45-50度
4. Better buy v2 fuel tank or DIY fuel spash guard to protect accident fuel over steering servo
<< (v2 既 fuel tank & radio box 訂左未番... T.T )
5. Front bumper breaks easily, maybe can buy de racing or v2 << 我都買定左 , 等我玩爛左個原裝個個先. (我覺得我好易會就撞爛)...
17#
 樓主| ringlecheng 發表於 2012-4-3 18:49:54 | 只看該作者
回復 fr888 的帖子

我另外有野想請教. (小弟第一次接觸 buggy ).
關於. kickup, 同 anti squat 到底 會有咩影响.??
請指教.
18#
joho 發表於 2012-4-3 19:20:13 | 只看該作者
For kick up and anti-squat, it can be a book! If you don't mind, I can write about it tonight.
19#
raman9551 發表於 2012-4-3 19:46:35 | 只看該作者
回復 joho 的帖子

yeah! 有ching冇煩惱
20#
tiger1 發表於 2012-4-3 21:01:28 | 只看該作者
ringlecheng 發表於 2012-4-3 18:30
回復 tiger1 的帖子

今晚等我換張 "風月版" 黎整先

then 我有 more 性趣
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-11-16 18:51 , Processed in 0.046514 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表