Sp 2.0pro esc原裝program card 係咪set唔倒turbo架？

在esc 個set制度可唔可以做到？ tkx! Ching

If I don't buy USB program card, then cannot updated? Mine is v1.6, is it too old?

回復 vin00002002 的帖子

用HW program card upgrade是共用的

u need to upgrade firmware first

That means original program card can't set turbo even the (set button on switch)?

Original can't use less that 10.5t motor? Mine is 5.5 sensorless.

vin00002002 發表於 2012-6-16 00:56

                               
登錄/註冊後可看大圖

That means original program card can't set turbo even the (set button on switch)?

當更新了 428Stock 或 428MOD 後便不能用開關側面的小按鍵進入program model 設定功能。而原裝的 七劃管 program card 也不能用，雖要改用 LCD Professional Program Card。

Tkx for ur info. If I don't update, can I use set button on switch to set turbo, n can the original esc  use sensorless 5.5t motor?

vin00002002 發表於 2012-6-16 22:55

                               
登錄/註冊後可看大圖

Tkx for ur info. If I don't update, can I use set button on switch to set turbo, n can the original  ...

之前買到的 GT2.0 Pro 內裡 Firmware 是沒有 Turbo 功能。要更新 Firmware至323STOCK 開始才有。更新了 便不能用開關側面的小按鍵進入program model 設定功能。而原裝的 七劃管 program card 也不能用，雖要改用 LCD Professional Program Card。而原裝 GT2.0 Pro 可用低至 3.5T 也沒問題。

kkchung 發表於 2012-6-20 19:11

                               
登錄/註冊後可看大圖

之前買到的 GT2.0 Pro 內裡 Firmware 是沒有 Turbo 功能。要更新 Firmware至323STOCK 開始才有。更新了 便 ...

Many tkx, ching