RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 7393|回復: 22
收起左側

新玩具

[複製鏈接]
ice1234 發表於 2006-11-14 22:51:52 | 顯示全部樓層 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
80% 完成

[ 本帖最後由 ice1234 於 2006-11-14 22:53 編輯 ]
DSC08885.jpg
DSC08887.jpg
DSC08888.jpg
gibson 發表於 2006-11-14 23:07:41 | 顯示全部樓層
very good, may I ask how to make turns????
中遠 發表於 2006-11-15 02:08:00 | 顯示全部樓層
打仗今既款。。。
BOBBY 發表於 2006-11-18 00:23:21 | 顯示全部樓層
几银啊?系边买架?
中遠 發表於 2006-11-18 00:27:51 | 顯示全部樓層
雙星野,千幾好似。。。
KMB182 發表於 2006-11-18 00:38:24 | 顯示全部樓層
原帖由 中遠 於 2006-11-18 00:27 發表
雙星野,千幾好似。。。


呢部車唔多似係星星出..
BOBBY 發表於 2006-11-18 00:49:51 | 顯示全部樓層
千幾?1/16架?雙星野好似无甘平啊?
中遠 發表於 2006-11-18 00:58:54 | 顯示全部樓層
以為係星星既泰格。。。
BOBBY 發表於 2006-11-18 01:41:29 | 顯示全部樓層
甘系边有买啊?
中遠 發表於 2006-11-18 02:30:59 | 顯示全部樓層
出廣華街問問d模型店店長。。。
Ang 發表於 2006-11-20 18:21:27 | 顯示全部樓層

Question

Looks like there are two 130 size motors and there is an integrated receiver + ESC unit.  Just curious how does the receiver+ESC control each motor ?

Pls share.
 樓主| ice1234 發表於 2006-11-21 22:08:08 | 顯示全部樓層
use servo to push the switch, so when one motor move , other one remain stop............tank will turn to the direction that u want..
Ang 發表於 2006-11-22 00:54:56 | 顯示全部樓層
原帖由 ice1234 於 2006-11-21 22:08 發表
use servo to push the switch, so when one motor move , other one remain stop............tank will turn to the direction that u want..

How does the wiring look like ?

I've got a few motorized model tanks at home and it'd be nice if it's easy to put R/C unit inside.
python 發表於 2006-11-24 09:36:12 | 顯示全部樓層
I think like this.

[ 本帖最後由 python 於 2006-11-24 12:07 編輯 ]

1.

1.
Ang 發表於 2006-11-24 23:14:07 | 顯示全部樓層

More pix on the servo-switch setup please

Thanks for the diagram, very interesting.

Any chance to post a close up of the servo-switch setup ?
tiger1 發表於 2006-11-26 14:27:58 | 顯示全部樓層
That is a Nichimo 1/35 Tiger 1. It uses two RE140 motors. Not good. The gears are very soft, easily stripped.....
 樓主| ice1234 發表於 2006-11-26 15:34:53 | 顯示全部樓層
原帖由 tiger1 於 2006-11-26 02:27 PM 發表
That is a Nichimo 1/35 Tiger 1. It uses two RE140 motors. Not good. The gears are very soft, easily stripped.....

it's type 130......not RE140 motor................
 樓主| ice1234 發表於 2006-11-26 15:35:21 | 顯示全部樓層
DSC08974.jpg
Ang 發表於 2006-11-26 23:58:31 | 顯示全部樓層

Close-up pix of the left/right switch mechanism please!

ice1234:

Very innovative mod   I'm surprised that you can fit so many stuff into a 1/35 platform.

I wish I could install the left/right switch mechanism into my motorized plastic model tanks.

Couple qusetions:
  • What kiind of micro-servo do you install ?
  • Would you mind to tell me how to DIY that left/right switch ?
  • Woud you put more close-up pix of the left/right switch mechanism ?
  • Would you show the inside of the turret ?  Isn't it the place where you put the battery ?
Tak Po got a dual motor ESC but it's too expensive for my liking.

Thanks
 樓主| ice1234 發表於 2006-11-27 21:38:42 | 顯示全部樓層
原帖由 Ang 於 2006-11-26 11:58 PM 發表
ice1234:

Very innovative mod   I'm surprised that you can fit so many stuff into a 1/35 platform.

I wish I could install the left/right switch mechanism into my motorized plastic model tank ...

photo

o個兩個只不過係普通撞掣.....鴨記有得賣....
用其中兩個接點......com 同 nc......
當其中一個掣比servo撞到,該撞掣會變no....即係open circuit......o個邊個motor就會停低唔轉.....

[ 本帖最後由 ice1234 於 2006-11-27 22:00 編輯 ]
DSC.jpg
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-4-19 06:55 , Processed in 0.040369 second(s), 19 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表