本帖最後由 hknewton 於 2015-9-2 15:50 編輯
要各路英雄久等唔好意思 !! 總算趕及年尾登場 !!!
V3.1MFC Professional LED System (配合田宮MFC-01, 03專用無線貨櫃燈系統) by ob1-RC
- V3.1MFC 直接插到 Tamiya 新燈MFC-01 (Item #56511) 上使用 (見Wiring diagram), 真正Plug & Play
- V3.1MFC + V3.1S 後就變成一套 "無線貨櫃燈", 代替 Tamiya Semi-Trailer Light Set (Item #56502) 之外,
另有以下升級功能:
- 藍牙2.0 一按(PAIR制) 連接拖頭 and 貨櫃 (見下面Connection)
- 電腳上落狀態偵測 (如有安裝Tamiya Support Legs)
- V3.1MFC 上有獨立6個 AUX LED, 與MFC-01 的AUX LED連動
- 3個 類似MFC-02 的閃動模式
- Lipo 低電壓檢測 (AUX LED閃燈提示 @ 低過6.2V)
- 追加多一個(共兩個)倒車燈
Officical Demo Video:
V3.1MFC + V3.1S:
V3.1MFC Wiring Diagram:
MFC-01 / V3.1MFC / V3.1S Connection:
V3.1MFC Operations:
V3.1MFC / V3.1S Combo Set 包括:
- V3.1MFC Main Unit x1;
- V3.1S Main Unit x1;
- MFC Main Harness (J9, J28) x1;
- REV Harness (J18) x1;
- SET/ PAIR Switch harness x1;
- Y-Harness x1;
- LED extend cable x2;
- V3.1MFC Manual x1;
- V3.1S Manual x1;
- Battery Box (AAx4) x1;
- 5mm WHITE LED cable (BL-R5CW1X) x1;
- 5mm YELLOW LED cable (BL-R3YE1X) x2;
- 5mm WHITE LED cable (BL-R5CW2X-15K) x1;
- 5mm RED LED cable (BL-R5RE2X-10K) x1;
- 5mm YELLOW LED cable (BL-R5YE1X) x2;
- LED cable (DIY, 60cm) x4
Specification:
Input Voltage: 5 - 6V (Powered by Taimiya MFC-01)
Low Voltage Detection: 6.2V (for LiPo 2S)
Dimension (Main Unit): 44mm (L), 38mm (W), 10mm (H)
(Excludes cables)
Specification (WIRELESS):
Bluetooth Protocol: Bluetooth Specification V2.0 with EDR
Frequency: 2.4GHz ISM band
Modulation: GFSK
TX Power: -4 - >4dBm, Class 2
V3.1MFC manual (EN).pdf
(408.01 KB, 下載次數: 264)
|