HOBBYWING 好盈電子變速器玩家專區：

綠島滌野 發表於 2013-11-22 11:51
請問我用緊120a v2.1, 一開個電變就閃綠燈，請問咩signal?

你可先查一下sensor線 的連接是否正常. 如果連接正常, 再試下換馬達Sensor版再試一下.

請問2.1外殼可訂嗎？要怎樣訂?

請問V3用blinky mode有沒有不同program,因為在加拿大比賽要用blinky mode。有沒有blinky mode專用的program呢？

你 set Zero Timing mode 就係啦!!
點 set 睇返說明書最尾嗰頁啦!
http://www.hobbywing.com/uploadfiles/sx/file/Manual/HW-SM510CHN.pdf

salton 發表於 2013-7-24 10:05
V2.1 120A目前来看仍然是性价比超高的选择。

外观，体积，可调教的参数更多，更多的辅助功能是V3.1的优 ...

師兄，請教HW 2.1 esc Lrp x20 4.5
玩Jv 怎樣set 電變各項
齒比（84/19）乘 （38/19）= 8.8
麻煩哂

本人玩zero s , 齒輪 比= (80/31) x (38/19)=5.16. 用 hw 120a + hw 10.5 T 有感motor.
排電 7.4 v 2 cell 30C full charge, 玩到每cell 3.5v左右, 電變勁閃 red 燈不能動, 要等一會或off 開關 然後on 番. 先可以行約30sec, 然後出現 同一情況red 燈勁閃不能動.
想問一下是
1)gear ratio 不對所至( 但手試過 motor 不是很熱)
2) battery c 數不夠.
3) 電熔 壞了.
4)還是esc setting problem
煩請 c hing 教一下
thanks

wolf 發表於 2014-1-2 17:40
本人玩zero s , 齒輪 比= (80/31) x (38/19)=5.16. 用 hw 120a + hw 10.5 T 有感motor.
排電 7.4 v 2 cell  ...

Gear ratio 好似低左啲，. Battery 30c ? 低！50 c la

thx c hing, 但motor 都不太熱, 及想知 esc 勁閃 red 燈係也意思呢? 會否玩壞了?因arm arm 重玩 rc .請教一吓

因為esc可能set 低電壓 自動停

ericwu 發表於 2014-1-2 20:17
因為esc可能set 低電壓 自動停

已玩回20 motor 齒 及 only set esc at 3.2v cut off. 但都在 full charge 7.2 v 2 cell 30 c 後, 到每cell 3.5v 左右, 個esc 閃red 燈. 冇反應!! please help

Ching,
Just my own case for your reference.
I have 5 HW ESC actively being used - V2.1(60, 90 and 120A) and Ezrun x 2.
I have to turn off 低電壓 protection for all 5 ESCs to get rid of the situation you descrbe above.
By doing so, you have to make sure you play within a reasonable time in order not to get your Lipo over discharged. What is a reasonable time depends on your electronics combination and FDR. Try and measure - this will need to be done quite a few times. Happy trying.

tsfai 發表於 2014-1-3 17:42
Ching,
Just my own case for your reference.
I have 5 HW ESC actively being used - V2.1(60, 90 and  ...

thx a lot ching information. according to your case about hobby wing esc, it means the low voltage cut off fuction is useless. we need to monitor the voltage by the old fashion way. between c hing would you suggest me a better esc other than hobbywing esc?

wolf 發表於 2014-1-4 04:10
thx a lot ching information. according to your case about hobby wing esc, it means the low voltage ...

Ching, forgot to mention that I have to turn off temp protection as well to enable continuous play.In my case I can play around 10 mins with below:
Zero s FDR 8.0
motor 7.5T with T+B = 60
6000mah 60c lipo
Motor and ESC temp less than 40c in Decemeber.
In your case, I guess you better get a lipo at least with 40c or above.
Just personal idea for your reference.
I think HW is a good value for money product.

thx c hing infornation.

請問好盈wp-1625係咪可以用3cell電，係咪防水？

從未 up date 過program card.???
要update ver.110211  //  110119 那一個好...
Motor 要用那一個11.50T 13.5T  17.5T  比較好／

請問 HW ESC 2.1同3.1可否用同一個programe box 用來set

salton 發表於 2013-7-16 10:19
1.7 Suitable Motor:  
       With 2S Lipo or 4-6 cells NiMH, 1/10 on-road>=8.5T, 1/10 off-road>=11 ...

Ching 請問V3.1, 馬達線ABC有冇短路保護架???
唔小心short左一下

kkchung 發表於 2013-6-17 13:28
1. 電子變速 (接收插連去) -->  LCD Program Box
2. LCD Program Box (USB插連去) --> 電腦 USB位。 ...

Kkchung師兄接上見到
Car_Esc
Hw427_v1.0
V2.0_100528_mod
請教要update esc 之 h ware version??

想請教：我用緊Xtreme stock esc.現在只有FOR 同 break ,就算我set 咗 for/rev/Break...是否已經壞了? 又或是我做錯嘢?