RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1218|回復: 2
打印 上一主題 下一主題
收起左側

Question about glue rubber tires

[複製鏈接]
跳轉到指定樓層
1#
GigaRacer 發表於 2007-1-9 02:12:16 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
I use CA glue, but made a messssss on the rims.

How do other Brother glue their tires?  Anyone has any better idea?  

Glue on the rims?  Glue on the tires?  Mount tires first, and then glue on the side??  Outside first?  inside first??  
2#
jimjimracing 發表於 2007-1-9 14:33:24 | 只看該作者
just use some sanding paper to rough the contact surface on the rims.
CA glue is good. very thin.  so use a little as possible.  and be very careful not to flow on the tyre surface.  
make sure that the tyres are balanced before glue..
3#
kennykpchow 發表於 2007-1-11 15:12:13 | 只看該作者
You'd better use Super Glue instead of Contact Adhesive (CA) to bond your tyres, because CA needs to applied both sides to be bonded(wheel & tyre) evenly, and wait for about 10 to 15 minutes until the adhesives feels dry.You cannot do that due to the technical issue, so I suggest you to use Super Glue, it can be used simply with single sided bonding, and fast to dry after bonding.

After you installed the tyre to the wheel, you can apply glue by using the pole of the glue bottle to mount out the tyre in between, straight forward to the centre of the wheel, after 1 round, reverse half to the edge of the wheel( don't too close the outest) and turn 1 more round, then oull out the bottle and press firmly to the tyre for about 10 - 15 seconds.

This is my own suggestion, if anyone not agree me, also okay.
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-11-16 14:53 , Processed in 0.028096 second(s), 15 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表